MTI 2E heads, MTI C1 hammer cam, ASP pulley(all for LS1)
Thread Starter
Registered User
Joined: Feb 2004
Posts: 1,736
From: Reidsville, NC
MTI 2E heads, MTI C1 hammer cam, ASP pulley(all for LS1)
- MTI 2E heads w/ferra 2.02 intake and 1.56 exhaust milled .30
-These heads came on the car I bought and I was not given the flow sheet.
$1100
-MTI C1 HammerCam 222/222 .566/.566 112lsa
-This cam was also in the car when I bought it and I do not have the cam card.
-$200
OR HEADS AND CAM BOTH FOR $1200....heads and cam are coming off the car next week.
NOTE: head, cam and bolt ons car went mid 11's with a slipping clutch and terrible traction
-ASP Pulley(no belts)
-I've had this pulley sitting around for about a year now and wondering if somone else might need it. It works fine the only problem is the rubber compound in the inner wall of the pulley has been scratched/scuffed up quite a bit. This pulley worked exceptional on my buddy's car when I bought it from him but I havnt gotten around to putting it on my car and could use the extra $$ for the new project.
-$125 obo
thanks
bubba
-These heads came on the car I bought and I was not given the flow sheet.
$1100
-MTI C1 HammerCam 222/222 .566/.566 112lsa
-This cam was also in the car when I bought it and I do not have the cam card.
-$200
OR HEADS AND CAM BOTH FOR $1200....heads and cam are coming off the car next week.
NOTE: head, cam and bolt ons car went mid 11's with a slipping clutch and terrible traction
-ASP Pulley(no belts)
-I've had this pulley sitting around for about a year now and wondering if somone else might need it. It works fine the only problem is the rubber compound in the inner wall of the pulley has been scratched/scuffed up quite a bit. This pulley worked exceptional on my buddy's car when I bought it from him but I havnt gotten around to putting it on my car and could use the extra $$ for the new project.
-$125 obo
thanks
bubba
Registered User
Joined: Apr 1999
Posts: 753
From: Chandler AZ
Re: MTI 2E heads, MTI C1 hammer cam, ASP pulley(all for LS1)
Do you have any idea how many miles are on the heads?
What cc are the combustion chambers?
Do you have any pics?
If so please send them to me at calvert1@***.net
What cc are the combustion chambers?
Do you have any pics?
If so please send them to me at calvert1@***.net
Thread Starter
Registered User
Joined: Feb 2004
Posts: 1,736
From: Reidsville, NC
Re: MTI 2E heads, MTI C1 hammer cam, ASP pulley(all for LS1)
heads are still on the car but will be off next week...heads have less than 3K miles...only reason there coming off is another set of blower friendly heads are going on since the car is now procharged...im not sure on the ccs of the chambers but go here and you might be able to find out more info....http://www.motorsporttech.com/fbody_engine01.asp
bubba
bubba
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM