Mostly forged 355 LT1 in MO, SPEC stage 3. Pickup ONLY
12-05-2004, 03:36 PM
#1
Registered User
Thread Starter
Join Date: Mar 2002
Location: Missouri
Posts: 595
Mostly forged 355 LT1 in MO, SPEC stage 3. Pickup ONLY
Sorry, but I am working now more than ever so this will have to be pickup (can meet you half way if you pay for my gas). Here is a little about the engine:
LT1 short block
Ross forged 2 valve relief pistons .030
Eagle 6" H beam rods
Stock crank
Polished lifter valley for better oil return, brass freeze plugs, vented opti timing cover, balancer hub, oil pan all included.
All balanced.
$750 bill at the machine shop when the balancing and block work was done.
Crosshatch pattern still in cylinders. This engine has about 1200 miles on it and it ran 11.30's-11.40's with a 6 speed and no power adder ever.
I will be willing to trade for some low compression forged pistons, forged crank, or other parts for my turbo 355 that will be getting built soon. Once again, pickup or meet only as I will not be able to find the time to pallet this engine and be around for pickup by a carrier. St Louis area is where I am for work and I am at Lake of the Ozarks on weekends.
Clutch is a SPEC stage 3 and it has the same mileage. Comes with stock flywheel, SPEC pressure plate, and clutch disc. Looks and works great. $350 for clutch setup.
Asking $1700 for engine.
LT1 short block
Ross forged 2 valve relief pistons .030
Eagle 6" H beam rods
Stock crank
Polished lifter valley for better oil return, brass freeze plugs, vented opti timing cover, balancer hub, oil pan all included.
All balanced.
$750 bill at the machine shop when the balancing and block work was done.
Crosshatch pattern still in cylinders. This engine has about 1200 miles on it and it ran 11.30's-11.40's with a 6 speed and no power adder ever.
I will be willing to trade for some low compression forged pistons, forged crank, or other parts for my turbo 355 that will be getting built soon. Once again, pickup or meet only as I will not be able to find the time to pallet this engine and be around for pickup by a carrier. St Louis area is where I am for work and I am at Lake of the Ozarks on weekends.
Clutch is a SPEC stage 3 and it has the same mileage. Comes with stock flywheel, SPEC pressure plate, and clutch disc. Looks and works great. $350 for clutch setup.
Asking $1700 for engine.
02-21-2005, 12:49 PM
#2
Registered User
Join Date: Feb 2005
Location: dover de
Posts: 21
Re: Mostly forged 355 LT1 in MO, SPEC stage 3. Pickup ONLY
interested in this motor, is there anyway i can call you to possibly arrange something? please email me @ fast4038a@yahoo.com,
thanks, chris
thanks, chris
Thread
Thread Starter
Forum
Replies
Last Post
Nostang 96z
Drag Racing Technique
4
09-14-2002 08:22 PM