lt1 T/A parts LOTS !!!
how much for the headlight assemblies. I don't need the motors. Main components needed I need from them are the headlight buckets and holding frame. Simply the parts holding the headlight in place. Obviously you will not be separating the assembly parts but I just want to make sure those are there.
-brian
-brian
i have the steering wheel but you were only asking about the coil ? i have everything regaurding the airbag in the drivers side except the air bag ! i have the whole column and the brain and the sensor (that mounts under the console ) and passenger airbag
how much for the headlight assemblies. I don't need the motors. Main components needed I need from them are the headlight buckets and holding frame. Simply the parts holding the headlight in place. Obviously you will not be separating the assembly parts but I just want to make sure those are there.
-brian
-brian
Yes I'm asking for the coil and their 4 connectors.....Do you uninstalled it already? May I ask you for pictures?
Im not interested in the steering wheel & column.
Thanks a lot
dochidalgo
Im not interested in the steering wheel & column.
Thanks a lot
dochidalgo
SS shifter ****
Can i have a pic of "1 leather ss shifter **** (auto)" sent to prowlerta@aol.com thanks.
Thanks for reply to me.
This device should be marked with the label; "handle with care" & "pain in the @ss"...why?...because you have to remove it (battery disconnected and the reteined accesory power should be disabled itself 10 minutes after the ignition switch is off) without spin the steering wheel before or during the procedure..otherwise, the internal wires will broke and will not send the 12 volts to the 4 electric harnesses (2 Air Bags and 2 stereeng wheel radio controls)....so, word of wise should be to check with a voltimeter, the 4 harnesses connectors...no volts means useless.
Here is a drawing:

The number 1 is de coil module
I really appreciate your time and effort to get this device for my car...i really don't like the windshield glass taste...
dochidalgo
This device should be marked with the label; "handle with care" & "pain in the @ss"...why?...because you have to remove it (battery disconnected and the reteined accesory power should be disabled itself 10 minutes after the ignition switch is off) without spin the steering wheel before or during the procedure..otherwise, the internal wires will broke and will not send the 12 volts to the 4 electric harnesses (2 Air Bags and 2 stereeng wheel radio controls)....so, word of wise should be to check with a voltimeter, the 4 harnesses connectors...no volts means useless.
Here is a drawing:
The number 1 is de coil module
I really appreciate your time and effort to get this device for my car...i really don't like the windshield glass taste...
dochidalgo
Last edited by dochidalgo; Jul 29, 2007 at 12:09 PM.
Thanks for reply to me.
This device should be marked with the label; "handle with care" & "pain in the @ss"...why?...because you have to remove it (battery disconnected and the reteined accesory power should be disabled itself 10 minutes after the ignition switch is off) without spin the steering wheel before or during the procedure..otherwise, the internal wires will broke and will not send the 12 volts to the 4 electric harnesses (2 Air Bags and 2 stereeng wheel radio controls)....so, word of wise should be to check with a voltimeter, the 4 harnesses connectors...no volts means useless.
Here is a drawing:

The number 1 is de coil module
I really appreciate your time and effort to get this device for my car...i really don't like the windshield glass taste...
dochidalgo
This device should be marked with the label; "handle with care" & "pain in the @ss"...why?...because you have to remove it (battery disconnected and the reteined accesory power should be disabled itself 10 minutes after the ignition switch is off) without spin the steering wheel before or during the procedure..otherwise, the internal wires will broke and will not send the 12 volts to the 4 electric harnesses (2 Air Bags and 2 stereeng wheel radio controls)....so, word of wise should be to check with a voltimeter, the 4 harnesses connectors...no volts means useless.
Here is a drawing:
The number 1 is de coil module
I really appreciate your time and effort to get this device for my car...i really don't like the windshield glass taste...
dochidalgo
1 set heater hoses for heater core
do you still have that and can you send me a pic to afrefueling20@hotmail.com
thanks
do you still have that and can you send me a pic to afrefueling20@hotmail.com
thanks



