i built a 95 and parted my 97 so i have quite a few parts left over !

2 grey leather door panels

2 sill plates

1 bmr adjustable torque arm IT'S BEEN REPAIRED BUT WORKS FINE !!! pending

1 fmu

1 mass air meter descreened works fine (went xfi )

1 grey auto console (out of a 95) great shape

2 rear v8 springs

2 h&r rear springs

1 p/s a pillar t-top

1 d/s a pillar t-top modified for (2) 2 1/16th gauges

1 leather ta shifter **** (auto)

1 leather ss shifter **** (auto)

1 leather ta/camaro shfter **** 5/6 speed

1 set heater hoses for heater core

1 heater core worked fine when removed

2 air pumps both work fine

1 wiring harness for a/4 car 96/97 has some splices

2 3rd gen power mirrors removed from an 89 gta

2 4th gen power mirrors removed from 97 trans am

1 rearview mirror

1 torque converter removed from a 96 ss with 51k on it

2 t top weatherstripping in great shape (no leaks)

2 pieces of rear t top trim (grey)

2 factory relay covers (in engine compartment)

1 radio trim piece (ta)

1 set dark grey seat belts with front seat guides

2 eclipse 10" subs they are dvc's they work great just hve too much stuff !

1 air pump bracket

2 abs modules from my 97 ta no codes no problems !

2 front lt1 spindles remove when car had 50 k on it rotors calipers and pads !

1 stock fuel pump

1 stock fuel regulator

1 cruise control box with cable

1 tcs box with cables (2)

1 a/4 crossmember

2 headlight assemblies removed from my 97

1 headlight motor removed from my 97 NO ISSUES !!!

2 interior rear trunk panels dark grey

2 rear passenger compartment b pillar panels grey

2 grey kick panels

1 ta cluster 55k on it 155 speedo (non digital)

procharger metal elbow with silicone couplers (to fit mass air meter)

stock map sensor and the sensors that mount on the intake manifold from the 97

ls1 timing cover gasket

ls1 valve cover gasket

2 lt4 head gaskets

2 lt4 OFFROAD performance intake gaskets

stock throttlebody with iac and top and bottom plate $35

stock t-56 torque arm bracket good shape removed at 45k

masterlube oil accumulator (similar to cantons accusump )

accel super coil (2 plug) 200 miles on it

(2) drivers side window switches

(1) passengers side window switch

series 4 carrier eaton posi maybe 2000 miles on it and richmond 4:10 gears removed from my moser 12 bolt

4 BRAND NEW COMP VR 10" KICKER subwoofers (straight from kicker )$100 per sub plus shipping of $7 that's like a $30 savings over circuit city

kicker zr 360 amp in good shape 400 watts rms (that's low it's more like 500-550 rms )

I'M LOOKING FOR A SERIES 3 POSI IN GREAT SHAPE AND A SET OF 3:42 to 3:55 GEARS FOR A 12 BOLT REAR

these items have no prices because i'm open to REASONABLE offers ! remember price of gas and packaging aren't free nor is shipping SO BE REASONABLE !!!! thanks !

 

pm me how much for the ICM and MSD coil shipped to 33351

 

How many miles/track runs on the QA1s? What are you asking for them?

--Alan

 

what year is the cluster???

 

pics and price on console PM

 

pm sent

 

just got home from work will respond to everyone with in 1/2 hour !

 

blown pic sent (and price )

aba not sure on milage on them but they don't leak and are nice and tight ($150 shipped ?) less than 1/2 new ?

air it's out of the 95 can send pics if needed

pm sent to mdacton

pm sent to clone

anyone who wants pics and has their email set to private send me a pm with it so i can get pics out !

 

probably silly question but do you still have that procharger intercooler or was that sold?

 

that sold awhile back

 

more added to the bottom

 

Do you have the SIR coil module or clock coil? The number 3 in the diagram












This device is in the steering wheel base, under the air bag and delivers 12v to the Air Bags and the steering wheels radio controls. It will fit my 97 TA if it comes from a 96-98 car.
Thanks
dochidalgo

 

yes i have that i have a whole sttering column ,wheel and all .if you want just the coil shoot me an offer !

 

I would like to see a coil picture if that is possible for you, in order to compare with mine. You may want not uninstall it from a steering wheel disengaged from the column nuckle..otherwise the coil module will not work and it will be useless for my car. Word of caution is to uninstall it with the battery not connected...could fire the air bag (s) .....
Let me explain please...

Mine was damaged when the muffler shop installed the drivers side header. They disengaged the steering wheel column nuckle and the steering wheel was free to spun beyond specification....now the AirBag light warning stays on always and the steering wheel radio controls dont work anymore.
I would appreciate your understanding.....and the picture of course...
You're de seller....shoot a price please...the shipping address is Eagle Pass,TX 78852

Thanks a lo
dochidalgo

 

i have the whole column (together ) if that would be easier (minus steering wheel and air bag )