LT1 Stroker, LE 2 Pkg
Thread Starter
Registered User
Joined: Sep 2003
Posts: 91
LT1 Stroker, LE 2 Pkg
ALL PARTS ARE BRAND NEW, UN-USED, NEVER INSTALLED.
LE2 Package.
2.00/1.60 Valves, #977 comp springs (Needs Comp R Lifters), Ti Retainers (NSA Rockers needed)
P/M Intake, clearanced for 58mm TB
LE2 Cam
$1500
389 Shortblock
Cola Forged 4340 crank
Eagle I Beam rods
Cloves Timing Set
Splayed 4 Cap Conversion
Coated Speed-pro Pistons
$2300 OBO
I have all reciepts if requested.
LE2 Package.
2.00/1.60 Valves, #977 comp springs (Needs Comp R Lifters), Ti Retainers (NSA Rockers needed)
P/M Intake, clearanced for 58mm TB
LE2 Cam
$1500
389 Shortblock
Cola Forged 4340 crank
Eagle I Beam rods
Cloves Timing Set
Splayed 4 Cap Conversion
Coated Speed-pro Pistons
$2300 OBO
I have all reciepts if requested.
Last edited by zrg91gt; Dec 28, 2004 at 06:57 PM. Reason: Clarification
Thread Starter
Registered User
Joined: Sep 2003
Posts: 91
Re: LT1 Stroker, LE 2 Pkg
The heads flow 260/186 @ 0.500" lift, about par for any of Lloyds heads. Cam is slightly bigger than CC306, only more power. Cannot give out specs.
Lloyd said with LT's, 400-420 rwhp is attainable.
Lloyd said with LT's, 400-420 rwhp is attainable.
Thread Starter
Registered User
Joined: Sep 2003
Posts: 91
Re: LT1 Stroker, LE 2 Pkg
Yes, the block is fresh. This is a brand new engine, with alll new parts. The pistons have a -18cc dish, and when I calculated it, w/ stock lt1 chamber volume, it came out to 10.2 to 10.5.
So your from Minne-soooootaH! I grew up in Rochester/Austin area. How much snow do yah have?
So your from Minne-soooootaH! I grew up in Rochester/Austin area. How much snow do yah have?
Registered User
Joined: Mar 2002
Posts: 218
From: Bloomington, MN
Re: LT1 Stroker, LE 2 Pkg
It is very depressing, we have none. I know down south (Caldonia) they have 4-6 inches, and up north they have anywhere from 2-10 inches but we have none. Are you intrested in shipping it? Your not coming home anytime soon are you? 
Registered User
Joined: Mar 2002
Posts: 218
From: Bloomington, MN
Re: LT1 Stroker, LE 2 Pkg
What would be shipping to 55439, we have a dock. If you could, please send pictures to jkleve@mn.rr.com - quite intrested.
Hey, if you need a snowmobile, we can work a trade that 10" would sure be nice riding!
Hey, if you need a snowmobile, we can work a trade
that 10" would sure be nice riding!
Last edited by Xscream; Dec 28, 2004 at 01:46 PM.
Thread Starter
Registered User
Joined: Sep 2003
Posts: 91
Re: LT1 Stroker, LE 2 Pkg
Well, I can't give you an exact quote for shipping (I have the week off from work), but I know that I had the core longblock shipped to my work for around $100-135.
Core engine is out of a 95 Impala SS. Block is a #327 Casting. Engine is decked 0.008", 0.030" overbore, Block was torque plate honed, Line honed, and all oil plugs were tapped 1/4" NPT and plugged, and staked.
Core engine is out of a 95 Impala SS. Block is a #327 Casting. Engine is decked 0.008", 0.030" overbore, Block was torque plate honed, Line honed, and all oil plugs were tapped 1/4" NPT and plugged, and staked.
Thread Starter
Registered User
Joined: Sep 2003
Posts: 91
Re: LT1 Stroker, LE 2 Pkg
As far as the snowmobile goes, all of the snow will be gone by friday, unfortunately LOL. Got a dirtbike? Michigan winter down here only seems to have about 2-3 weeks of good riding. Now, doesn't 'sota have a 500 mile sled trail?
