LT1 Shortblock for Turbo, 88MM turbo, blow thru.....
Thread Starter
Registered User
Joined: Feb 2006
Posts: 92
LT1 Shortblock for Turbo, 88MM turbo, blow thru.....
LOOK DOWN NEW PRICE!!
Okay here is what i have, a LT1 block, with less than 20000 miles on it was pulled apart, decked, bored and torque plate honed, it has SRP dished pistons for a turbo application (tall top ring lang, around .300), Luaniti pro mod rods and a GM 1 peice forged steel crack, arp mains, 0 miles on the build. I was going to retro the motor to take a carb and regular distributor, so the opti holes where welded shut on the timing chain cover and water pump housing, but it comes with a brand new mezire electric water pump. It comes with a nice stock oil pan, oil pump and pick up, stock roller cam with lifters. Then i have an 88 MM turbo Garrett turbo, and was purchused through Percision turbos and has less than 100 miles on it with no end play. Tial blow off valve, Demon 850 Blow thur carb, and an extreme vilosity hat for the carb. And it think that is about it, i decided to go with a big block on gas, so that is the reason im selling this stuff. I really wanna sell it all as a complete package, for $3000 absolutly FIRM. thanks Also can get pics at request. Local pick up only, Hickory NC
Okay here is what i have, a LT1 block, with less than 20000 miles on it was pulled apart, decked, bored and torque plate honed, it has SRP dished pistons for a turbo application (tall top ring lang, around .300), Luaniti pro mod rods and a GM 1 peice forged steel crack, arp mains, 0 miles on the build. I was going to retro the motor to take a carb and regular distributor, so the opti holes where welded shut on the timing chain cover and water pump housing, but it comes with a brand new mezire electric water pump. It comes with a nice stock oil pan, oil pump and pick up, stock roller cam with lifters. Then i have an 88 MM turbo Garrett turbo, and was purchused through Percision turbos and has less than 100 miles on it with no end play. Tial blow off valve, Demon 850 Blow thur carb, and an extreme vilosity hat for the carb. And it think that is about it, i decided to go with a big block on gas, so that is the reason im selling this stuff. I really wanna sell it all as a complete package, for $3000 absolutly FIRM. thanks Also can get pics at request. Local pick up only, Hickory NC
Last edited by BT283; Apr 12, 2007 at 01:14 PM.
Thread Starter
Registered User
Joined: Feb 2006
Posts: 92
okay, here is the deal i have decided to keep my LT1 block rods and crack and other little thing for the LT1 engine. So here is what i wanna do now, Sell the .030 over SRP blower pistons, Turbo, Tial blow off valve, Carb, and carb hat, for $1500 and i will ship it anywhere. thanks
Registered User
Joined: Mar 2002
Posts: 2,743
From: Baton Rouge, LA, USA
That's a steal. What are the full spec's on the stuff you are selling?
What 88 mm turbo? (GT47-88, PT-88, etc?)
What rod length and crank are the pistons for? What dish size?
Which Tial BOV?
Mike
What 88 mm turbo? (GT47-88, PT-88, etc?)
What rod length and crank are the pistons for? What dish size?
Which Tial BOV?
Mike
Thread Starter
Registered User
Joined: Feb 2006
Posts: 92
I dont know what the turbo is , other than its a Garrett
The pistons are for a 5.7 rod and 3.48 stroke and i dont know what size the dish is
And i dont know the exact model of the of the BOV but i know it costs around $250-300 new
The pistons are for a 5.7 rod and 3.48 stroke and i dont know what size the dish is
And i dont know the exact model of the of the BOV but i know it costs around $250-300 new
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM