LT1 and SBC stuff
Thread Starter
Registered User
Joined: Jan 1999
Posts: 989
From: Baton Rouge, la
LT1 and SBC stuff
General stuff
Jegs part number 555-82270 Zeus Fastener kit - Never opened. 50 bucks.
LTs and SBC stuff
LT1 Stock Hyd. Roller Lifters. - 2 full Set of 16 but one came apart in the bag in one of the sets. 30 bucks/set.
Comp Cams 1.52 Pro Mag rockers. Full set with poly locks for 7/16 stud. Very low miles on these and look like new. - 200
Comp Cams Magnum with polly locks for 3/8 stud - 75
MSd Pro Billet Oil drive PN 8513 for SBC. I bought from Tanner but never used it. - 140
[SBC Only
Lunati cam Mech Rooler tappit. 50105-106 Adv. duration - 294/300 Lift 597/600 106 LS Comes with lunati springs and 10 deg. locks. - 250
Comp Cams 294S Mech Flat Tappit with lifters. One lifter is missing. Lift: .525'' Adv. Duration: 294° Came out of my old vette. Maybe 500 miles on the cam. - 125
MSd Pro Billet Oil drive PN 8513 for SBC. Never run - 140
BowTie Iron Heads. These were on my vette and went 11.8s in an untuned street combo with the 295 Comp cam above. 2.05/1.60 Heads are completely set up and have springs to handle up to 600 lift. These are hand ported and came off of a sprint car motor before I got them. - 800
Scat SBC 103503480 cast steel Crank. 3.48 2pc. rear main, internal ballanced. Brand new, never pulled out of box. In fact the box has never been opened. - 180
Fluidamper Harmonic Damper pm 712615 OD - 6 1/4 Fits SBC 262-350 - 200
Push Rods. These were in the motor in the vette with the Comp cam 294S and the Bowtie heads. I think they are 5/16" - 50
Jegs part number 555-82270 Zeus Fastener kit - Never opened. 50 bucks.
LTs and SBC stuff
LT1 Stock Hyd. Roller Lifters. - 2 full Set of 16 but one came apart in the bag in one of the sets. 30 bucks/set.
Comp Cams 1.52 Pro Mag rockers. Full set with poly locks for 7/16 stud. Very low miles on these and look like new. - 200
Comp Cams Magnum with polly locks for 3/8 stud - 75
MSd Pro Billet Oil drive PN 8513 for SBC. I bought from Tanner but never used it. - 140
[SBC Only
Lunati cam Mech Rooler tappit. 50105-106 Adv. duration - 294/300 Lift 597/600 106 LS Comes with lunati springs and 10 deg. locks. - 250
Comp Cams 294S Mech Flat Tappit with lifters. One lifter is missing. Lift: .525'' Adv. Duration: 294° Came out of my old vette. Maybe 500 miles on the cam. - 125
MSd Pro Billet Oil drive PN 8513 for SBC. Never run - 140
BowTie Iron Heads. These were on my vette and went 11.8s in an untuned street combo with the 295 Comp cam above. 2.05/1.60 Heads are completely set up and have springs to handle up to 600 lift. These are hand ported and came off of a sprint car motor before I got them. - 800
Scat SBC 103503480 cast steel Crank. 3.48 2pc. rear main, internal ballanced. Brand new, never pulled out of box. In fact the box has never been opened. - 180
Fluidamper Harmonic Damper pm 712615 OD - 6 1/4 Fits SBC 262-350 - 200
Push Rods. These were in the motor in the vette with the Comp cam 294S and the Bowtie heads. I think they are 5/16" - 50
Last edited by 95Bird; Dec 14, 2008 at 10:30 AM.
Thread
Thread Starter
Forum
Replies
Last Post