Cook Performance

T56 tranny, freshly rebuilt -0 miles with tick-performance stage 2 rebuild kit. LT1 piece with bellhousing. On ebay also, listed today 1-24-10. will end in 7 days. Awesome deal for someone looking for a nice tranny that beefed up a bit. The item number is 400099440697.

Used Spec stage 3 clutch
LT1 flywheel
BBK TB 58mm
Stock TB from 97 Z28
TFS Air Inlet Elbow, polished finish, complete with a hardware and clamps.
Granatelli MAF
Fluidampr LT1 balancer
2 sets of 7/16" ARP 8740 rod bolts for Eagle H beam rods. One set brand new, the other under 15K and good to reuse.
MSD REV limiter with alot of rev chips. Guaranteed to have to rev chip you want.

PCM tuned by Ed Wright at Fast Chip for the camshaft and other changes we made to the car. If interested ask questions. It has an LT4 knock Module.

Stock PCM factory tune, no knock module installed.

Water pump drive gear, Brand New GM piece. GM has discontinued these, we special ordered them from all over the country and have one left if anyone is in need.

Custom grind camshaft 236/242 @.050 114LSA
.555 lift intake .575 lift exhaust with 1.6 Rockers.
Intake open 8 degrees BTDC Close 48 ABDC
Exhaust Open 59 degrees BBDC Close 3 ATDC

Gm Performance lifters ran with the camshaft are in very good shape and are reusable.

Comp Pro Mag roller rockers. 1.6 ratio
Comp 7.200 Pushrods

All Parts listed have under 15,000 miles on them.
The clutch will work good, I recommend a new disk, I can supply this as I am a spec clutch dealer.

All other parts listed are in good working order.
I have alot of misc LT1 stuff for sale, if you are looking for something specific PM me.

Jake Cook Performance Engines 317-697-6061

presteej

prices?

Cook Performance

PM or email me what you are interested in and we can discuss pricing. The T56 is on eBay for a buy it now price of $1900.

I am just getting rid of some stuff I do not need anymore and at the same time give people an opportunity to get nice stuff fairly cheap.
Make an offer on what you are interested in.

Email. Jakecook@cpengines.com

Jake. 317-697-6061

Romero155

do you have a part number for the fluidamper?

Cook Performance

I have sold a few items. Here is what I have left:
All parts are from my 97 Z28, going a new route on everything.

Fluidampr..balancer part # FLU-740101 $220 shipped
Stock TB $50 shipped
ARP 8740 7/16" rod bolts. 1 new set/1 good used set
$40 shipped for new set. $60 for both.

Fast chip tuned PCM w/ LT4 knock module, tuned for a Custom grind camshaft 236/242 @.050 114LSA
.555 lift intake .575 lift exhaust with 1.6 Rockers.
If interested I will give more detail. $250 shipped

Custom Grind Cam: Listed above. $100 shipped
Comp 850 lifters, ran with cam. $75 shipped

PCM- reman piece, good core for tuning, currently has a Stock tune. $55 shipped. Never been used since purchase.

MSD REV limiter with chips Part # 8728 & 8747
chips included are 3000,5600,6000,7000,7200,7400
7600,7800 & 8000 RPM. $70 shipped


GM water pump drive gear assembly.
Brand new, $85 shipped

Comp Cams Pro Mag roller rockers. Part # 1305-16.
1.6 ratio, 7/16" stud. $165 shipped

Comp Magnum 7.200" pushrods. $55 shipped

Meziere EWP. part # MEZ-wp118hd. pump works great. $140 shipped

Aeromotive fuel pressure regulator part # 13101
$75 shipped

SVO 30 lb/hr injectors $100 shipped

2- O2 simulators Almost like new. $40 shipped

I also have a nicely built 383 complete shortblock.
Custom grind Billet Cam. Hyd roller, if interested let me know and I will release specs.
Callies Dragonslayer crank, Eagle H beam 6" rods,
Mahle forged flattop pistons, ARP 2000 rod bolts,
Canton 242t oil pan, HV oil pump, ARP oil pump driveshaft,
Cloyes clo-9-3145 double roller timing chain set.
GM timing cover- top hole welded for use of Electric W/P.
Freshly rebuilt by myself, all machine work and assembly done by Cook Performance Engines. www.cpengines.com

Mahle powerpak pistons are new .040 -5cc flattop
Rings are file fit for nitrous, will handle 250-300 shot easy.
Crank was turned .010 .010
Clevite H series bearings
rod bolts are new
oil pan freshly powder coated black- not ran since.
timing set-new
custom grind billet cam - new
rear main housing -new GM
GM oil pan gasket
Zero decked, square decked block, torque plate honed, screw in front galley plugs, oil return work performed in lifter valley. This engine will run hard for a long, long time.
I built this engine to run on nitrous with 11.75:1 compression on pump gas.

The price for this complete shortblock is $5000. I will honor my two year warranty on this engine also. This was the shortblock going in my car, but I have made some changes to the plans. Shhh..

Let me know if anyone is in need, or you may see the stuff on ebay very soon.

Jacob Cook 317-697-6061
Cook Performance Engines www.cpengines.com

Drkbwtiprfm25

pm sent about the rockers.