LT1 cc306 cam and springs.
#1
LT1 cc306 cam and springs.
I have my cc306 up for sale along with my CM612 springs and new comp cams spring hardware. Springs and cam have less than 3000 miles on them. Includes all parts for cam and valve spring swap. Here are pics. I will be selling brand new comp cams retainers and locks (just purchased from summit racing last month). The seats/locators have less than 3000 miles on them like the springs. I would like to get $300 shipped for everything.
http://www.geocities.com/jonaddis842...ig00000001.JPG
http://www.geocities.com/jonaddis842...ig00000003.JPG
http://www.geocities.com/jonaddis842...ig00000005.JPG
http://www.geocities.com/jonaddis842...ig00000007.JPG
Email me if interested craigs96formula@yahoo.com.
http://www.geocities.com/jonaddis842...ig00000001.JPG
http://www.geocities.com/jonaddis842...ig00000003.JPG
http://www.geocities.com/jonaddis842...ig00000005.JPG
http://www.geocities.com/jonaddis842...ig00000007.JPG
Email me if interested craigs96formula@yahoo.com.
Last edited by 96blkform; 03-28-2006 at 11:38 AM.
#4
Re: LT1 cc306 cam and springs.
A ttt for him but yes the springs will fit stock heads without further work being done.
If you do a search on 612 springs you will see that this has been discussed a few times
If you do a search on 612 springs you will see that this has been discussed a few times
#6
Re: LT1 cc306 cam and springs.
PM & e-mail sent back
Here are the specs according to summit:
Exhaust Duration at 050 inch Lift: 244
Duration at 050 inch Lift: 230 int./244 exh.
Advertised Intake Duration: 290
Advertised Exhaust Duration: 307
Advertised Duration: 290 int./307 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.540 in.
Valve Lift with Factory Rocker Arm Ratio: 0.510 int./0.540 exh. lift
Lobe Separation (degrees): 112
Here are the specs according to summit:
Exhaust Duration at 050 inch Lift: 244
Duration at 050 inch Lift: 230 int./244 exh.
Advertised Intake Duration: 290
Advertised Exhaust Duration: 307
Advertised Duration: 290 int./307 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: 0.510 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.540 in.
Valve Lift with Factory Rocker Arm Ratio: 0.510 int./0.540 exh. lift
Lobe Separation (degrees): 112
Last edited by 96blkform; 03-28-2006 at 09:31 AM.
Thread
Thread Starter
Forum
Replies
Last Post
oldschool
Parts For Sale
16
02-09-2016 09:21 PM
95chwagon
Parts For Sale
4
01-13-2015 09:19 PM