LT1 Blower Cam 224/236 FS
Thread Starter
Registered User
Joined: Apr 2000
Posts: 392
From: Columbus, Ohio
LT1 Blower Cam 224/236 FS
The cam is a Comp Cams high lift XE grind with specs below. It was used for just 1,000 miles and is in perfect condition.
3192/3196 lobes
224/236 @ 0.050" lift
116 lobe separation angle
112 degree intake center line (4 deg of advance ground in)
lobe lift = .378/.390"
lift with 1.5 = .567/.585"
lift with 1.6 = .605/.624"
SOLD.
3192/3196 lobes
224/236 @ 0.050" lift
116 lobe separation angle
112 degree intake center line (4 deg of advance ground in)
lobe lift = .378/.390"
lift with 1.5 = .567/.585"
lift with 1.6 = .605/.624"
SOLD.
Last edited by TimbrSS; Oct 25, 2005 at 10:19 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
1LEThumper
Forced Induction
40
Jul 14, 2003 12:45 PM