LSx Patriot Extreme Valve springs BNIB.. 250.00
#1
LSx Patriot Extreme Valve springs BNIB.. 250.00
well apparently you cant use LSx valve springs on a sbc so i need these gone. would rather loose some money on it then send it back.
they were never run, tried to install them tonight, and they dont fit.
my loss your gain
http://www.jegs.com/i/Patriot-Perfor...ductId=1122046
# Technical Specs: Install Height: 1.800''
# Max. Valve Spring Lift: 0.660''
# Spring Pressure Closed: 155 lbs. @ 1.800''
# Spring Pressure Open: 410 lbs. @ 1.140''
# Coil Bind: 1.090''
# Retainer Material: Titanium
Patriot Performance's Xtreme spring evolved from our Orginal Patriot Gold. The Xtreme spring is for power adder applications, heads using large valves, and for aggressive cam profiles. These complete spring consists of 16 Patriot Gold dual springs, 16 titanium retainers, 32 Super 7 Machined locks, 16 .505'' ID machined spring bases, and 16 viton rubber seals. This kit will work with both stock and aftermarket rocker arms. No cutting or machining of the stock spring pocket is needed.
*1 kit required per pair of heads.
250.00
i would rather sell these locally, but if you want them we can work out shipping.
buyer pays shipping
aaron
they were never run, tried to install them tonight, and they dont fit.
my loss your gain
http://www.jegs.com/i/Patriot-Perfor...ductId=1122046
# Technical Specs: Install Height: 1.800''
# Max. Valve Spring Lift: 0.660''
# Spring Pressure Closed: 155 lbs. @ 1.800''
# Spring Pressure Open: 410 lbs. @ 1.140''
# Coil Bind: 1.090''
# Retainer Material: Titanium
Patriot Performance's Xtreme spring evolved from our Orginal Patriot Gold. The Xtreme spring is for power adder applications, heads using large valves, and for aggressive cam profiles. These complete spring consists of 16 Patriot Gold dual springs, 16 titanium retainers, 32 Super 7 Machined locks, 16 .505'' ID machined spring bases, and 16 viton rubber seals. This kit will work with both stock and aftermarket rocker arms. No cutting or machining of the stock spring pocket is needed.
*1 kit required per pair of heads.
250.00
i would rather sell these locally, but if you want them we can work out shipping.
buyer pays shipping
aaron
Thread
Thread Starter
Forum
Replies
Last Post