LE2 ALuminum LT1 Heads
LE2 ALuminum LT1 Heads
HEADS
LE2 heads (lloyd elliot) $1250
1.7 Ultra Mag rockers / trick flow guideplates / lloyds pushtods $250
Patriot Gold Extreme 8401-BSBC the ones lloyd suggested me to run $125
Screw in studs the big ones and Trick Flow Guide Plates $50
sell the whole set complete $1450
from lloyds email....
we use Self Aligning Pro mag or Ultra mag rockers, we can use Patriot gold extreme springs and set them up at 1.780-1.800". these will have 155 lbs of seat pressure and 380-400 lbs open pressure. These will allow us to use .592 lift and have the springs live a LONG time.
LE2 heads (lloyd elliot) $1250
1.7 Ultra Mag rockers / trick flow guideplates / lloyds pushtods $250
Patriot Gold Extreme 8401-BSBC the ones lloyd suggested me to run $125
Screw in studs the big ones and Trick Flow Guide Plates $50
sell the whole set complete $1450
from lloyds email....
we use Self Aligning Pro mag or Ultra mag rockers, we can use Patriot gold extreme springs and set them up at 1.780-1.800". these will have 155 lbs of seat pressure and 380-400 lbs open pressure. These will allow us to use .592 lift and have the springs live a LONG time.
Last edited by Crispix396; Oct 19, 2011 at 01:37 PM.
Re: LE2 ALuminum LT1 Heads
Sorry if i misled anyone, the Valve Springs I have are Patriot Gold Extreme 8401-BSBC
https://www.patriot-performance.com/...&cat=52&page=2
Price remains the same. I paid 275 for the springs, they have roughly 2500 street miles on them.
https://www.patriot-performance.com/...&cat=52&page=2
Price remains the same. I paid 275 for the springs, they have roughly 2500 street miles on them.
Re: LE2 ALuminum LT1 Heads
Sorry. For some reason it never subscribes me to my posts.
Whole setup has 2500. I got the heads about 5000 miles back and re setup valve team. About 2500 miles ago. I'll take photos hopefully you can determine chamber size from that as I don't have that written down anywhere.
Whole setup has 2500. I got the heads about 5000 miles back and re setup valve team. About 2500 miles ago. I'll take photos hopefully you can determine chamber size from that as I don't have that written down anywhere.
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Wittmer
General 1967-2002 F-Body Tech
0
Dec 7, 2014 12:15 PM














