Car SOLD. Please Page 2 for updated parts list!


Well, I am gonna try and part out the shop car. Nothing is for sale unless the motor sells. Please post replies in here or email me at jon@lt1boost.net (no pm's as they fill up too quick).

Engine w/Heads assembled
Golen Engine Services 383ci shortblock (~10k naturally aspirated)
Eagle Forged 4340 3.75' crank
HRC 5.7" rods
JE -31cc Pistons
4 bolt main conversion w/billet caps
ARP rod bolts, main studs
new LT1 oil pump w/white Z28 hi-pressure spring
GMPP single roller timing chain
keyed crankshaft hub
CC 218/230 .528/.510 114LSA (specs with 1.5 R's)
CNC'd AFR LT4 227's 60cc with T&D shaft mounted 1.6 RR's (springs set up for boost) with Felpro 1079's
ARP Head studs
$4000 with everything listed above or delete the heads and take the rest for $2000. Heads will then be sold separately with rockers and head studs for $2100 shipped)

New LE ported LT4 intake manifold - not installed yet (AFR intake manifold gaskets included) - $400

New Summit 58mm Polished TB (with Evil opti TB plate mounted) - $175 shipped

Used Custom fabbed aluminum valvecovers for the AFR227's - $175 shipped

New LT1 Boost PT88 Hotparts set up for PT88 turbo - Custom 1.75" headers, 2.5" crossover pipe, 3" DP and JGS 50mm Wastegate - $2000 shipped

New Precision PT88 .96 A/r turbo - $1300 shipped

New JGS 60mm BOV - $200 shipped

Coolingmist Alcohol Injection Kit - You will most likely need to extend wiring and get some additional lines. I will include a Trickflow TB Elbow with dual nozzles mounted - $350 shipped

Turbowerks Oil Scavenge Pump (to run drain back to Valve covers in case you don't wan o run to pan) - $75 shipped

FAST Classic Plug and Play with White's Racing Plug N Play Harness (I bought used and was in working order when I bought it... I never installed though) - $1000 shipped

3" Electric cutout (was exposed to water, but I disassembled and it appears to function fine). - $50 shipped

Taylor Spark Plug Wires - $35 shipped (black)

New MSD vented Opti - $350 shipped

MSD Coil - $30 shipped

New MSD 6BTM - $200 shipped

Aeromotive AFPR - $115 shipped

New Siemens 80# High Z injectors - $400 shipped

Used (10k miles) Meziere Electric Water pump and stock housing - $200 shipped

Griffin Vertical radiator setup (setup for LT1) - $300 shipped

Flexalite dual fans (12" puller and 12" pusher) - $300 shipped

4 NEW 17" black TT2''s with polished lip (17x9 fronts and 17 x 10.5 backs) - $800 pick up only

NEW Nitto tires (275's in front and 315/35-17 DR's in back) - $800 pick up only

BMR shock tower brace (Black) - $60 shipped

New AEM Wideband - $150 shipped

1996 Trans Am Raim Air WS6 Six Speed roller~75k - Includes working tranny and rearend 1500 pickup only
Stock T56 Transmission
B+M Ripper short-throw shifter
Mcleod Street twin clutch/flywheel
1LE aluminum driveshaft
stock Gm 10 Bolt rearend 3.42 gears
HPM subframe connectors (Black)
BMR tunnel brace/driveshaft safety loop (Black)
Stock leather interior (charcoal)
Alot of panels removed and center console out - have all parts)
Stock 17" TA rims/street tires
Slotted/drilled rotors and upgraded pads
3" Borla Catback

 

 

 

 

 

Jon, if the motor sells, I'll take the roller. Also, I have a friend that is intereted in buying my motor. If I can sell that to him, I'll buy your motor and you could just leave it in the car for me. Let's talk on the phone.

Jason

 

 

Jon I will take the roller if everything else sells

Also AEM widebands you can get for $150 shipped from some sponsors

Do u have a boost controller for sale?

 

Rob,

I will keep you posted. I have a couple people inline ahead of you that also expressed an interest in taking the roller.

Unfortunately I dont have a boost controller.

 

Good luck Jon. Let's hope it finds a good new home. Any plans for a new ride for you?

 

Thanks Dave. No new plans... too many things I need to fix on the house.

 

Thats a steal for the roller!!!

 

Are the taylor wires new? If so I'll take them.

 

msd opti available?

 

Hey was wondering if that rad will work on a LS setup