FS - LS1 Lid Swap Kit $155
06-06-2008, 02:04 PM
#1
Registered User
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 1,193
FS - LS1 Lid Swap Kit $155
FS - LS1 Lid Swap Kit including Motorsport Lid, LS1 Stock Radiator Support/base, K&N Filter and Smooth Bellows. $130 Shipped . SOLD
Most of these parts came off a 2002 SS. The lid is an LS1 Motorsports lid and is crack free and has some stickers on it. The base is stock and unmolested. To make this kit work you will need to modify the base by cutting the plastic radiator support to sit flat on the cross bar. The smooth bellows should work to connect your MAF to the throttle body. The K&N drop in filter is used but will come cleaned and ready to use.
***The ls1 lid will not clear a stock hood with this support. An aftermaket hood is required to clear the lid and support. Custom work is required to fit this on your car and a search of the tech forums will pull up the basic information. Odds and ends may be required for your setup that can be canabilized form your stock setup or purchased at Homedepot.***
Most of these parts came off a 2002 SS. The lid is an LS1 Motorsports lid and is crack free and has some stickers on it. The base is stock and unmolested. To make this kit work you will need to modify the base by cutting the plastic radiator support to sit flat on the cross bar. The smooth bellows should work to connect your MAF to the throttle body. The K&N drop in filter is used but will come cleaned and ready to use.
***The ls1 lid will not clear a stock hood with this support. An aftermaket hood is required to clear the lid and support. Custom work is required to fit this on your car and a search of the tech forums will pull up the basic information. Odds and ends may be required for your setup that can be canabilized form your stock setup or purchased at Homedepot.***
Last edited by tireburnin; 07-23-2008 at 11:28 AM.
06-10-2008, 12:21 AM
#4
Registered User
Thread Starter
Join Date: Jul 2002
Location: San Diego, CA
Posts: 1,193
People keep asking which hood this will clear and the answer is it there are a number of aftermarket ones. There is a full list available on LS1tech in the LT1 section. Most cowl hoods will clear.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM