FS: B/O on all... STUFF TO GO
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Originally posted by carguyshu
what is wrong w/ the rear
what is wrong w/ the rear
I'm not excactly sure yet, when I would go around turns, etc.. the rear would bind up on me and clunk... I believe the posi is SHOT but I dunno for sure... I'd have to pull it apart to try and figure it out....
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Re: FS: B/O on all... STUFF TO GO
Originally posted by Hyperspeed97z28
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
Stock LCA's (2 pairs)---
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) non gm -- gp sorenso from advance.... ---
(1) Stock 28mm front / (2) 19mm Rear Swaybars ---
(2) Steel driveshafts's, One from a 97 m6 and the other a 95 m6---
(1 D/S is pending payment)
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Stock REAR rotors, GM rotors, 50k, Surface rust, Great shape aside from the surface rust, A quick turn will clean these right up !! Will Include REAR brake pads with these..-(SOLD !!! 6-28-04)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
"93-97 Rear disc brakes complete minus pads/rotors off the axle" --- (SOLD !!! 6-30-04)
2002 SS PAINTED 10 Spoke Rims 17x9 set of 4 w/extra center caps --- $350 shipped or pick up locally.... (not to the west coast, to much for shipping) *** ON EBAY NOW ***
2 BFG Tires : 275/40/17's --- enough left for maybe 5,000 miles or some serious burnouts --- (tires are just above the wear indicators)
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)
P/A Racing "REAR" LCA's Painted black, USED about 10k ----
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
Stock LCA's (2 pairs)---
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) non gm -- gp sorenso from advance.... ---
(1) Stock 28mm front / (2) 19mm Rear Swaybars ---
(2) Steel driveshafts's, One from a 97 m6 and the other a 95 m6---
(1 D/S is pending payment)
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Stock REAR rotors, GM rotors, 50k, Surface rust, Great shape aside from the surface rust, A quick turn will clean these right up !! Will Include REAR brake pads with these..-(SOLD !!! 6-28-04)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
"93-97 Rear disc brakes complete minus pads/rotors off the axle" --- (SOLD !!! 6-30-04)
2002 SS PAINTED 10 Spoke Rims 17x9 set of 4 w/extra center caps --- $350 shipped or pick up locally.... (not to the west coast, to much for shipping) *** ON EBAY NOW ***
2 BFG Tires : 275/40/17's --- enough left for maybe 5,000 miles or some serious burnouts --- (tires are just above the wear indicators)
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)
P/A Racing "REAR" LCA's Painted black, USED about 10k ----
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Post updated...
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Re: FS: B/O on all... STUFF TO GO
Originally posted by Hyperspeed97z28
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
Stock LCA's ***SOLD**
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) non gm -- gp sorenso from advance.... ---
(1) Stock 28mm front / (2) 19mm Rear Swaybars ---
(2) Steel driveshafts's, One from a 97 m6 and the other a 95 m6---
(1 D/S is pending payment)
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Stock REAR rotors, GM rotors, 50k, Surface rust, Great shape aside from the surface rust, A quick turn will clean these right up !! Will Include REAR brake pads with these..-(SOLD !!! 6-28-04)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
"93-97 Rear disc brakes complete minus pads/rotors off the axle" --- (SOLD !!! 6-30-04)
2002 SS PAINTED 10 Spoke Rims 17x9 set of 4 w/extra center caps --- $350 shipped or pick up locally.... (not to the west coast, to much for shipping) **SOLD 7/2/04**
2 BFG Tires : 275/40/17's --- enough left for maybe 5,000 miles or some serious burnouts --- (tires are just above the wear indicators)
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)
(2 SETS "1 new the other used) P/A Racing "REAR" LCA's Painted black, USED about 10k ----
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
Stock LCA's ***SOLD**
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) non gm -- gp sorenso from advance.... ---
(1) Stock 28mm front / (2) 19mm Rear Swaybars ---
(2) Steel driveshafts's, One from a 97 m6 and the other a 95 m6---
(1 D/S is pending payment)
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Stock REAR rotors, GM rotors, 50k, Surface rust, Great shape aside from the surface rust, A quick turn will clean these right up !! Will Include REAR brake pads with these..-(SOLD !!! 6-28-04)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
"93-97 Rear disc brakes complete minus pads/rotors off the axle" --- (SOLD !!! 6-30-04)
2002 SS PAINTED 10 Spoke Rims 17x9 set of 4 w/extra center caps --- $350 shipped or pick up locally.... (not to the west coast, to much for shipping) **SOLD 7/2/04**
2 BFG Tires : 275/40/17's --- enough left for maybe 5,000 miles or some serious burnouts --- (tires are just above the wear indicators)
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)
(2 SETS "1 new the other used) P/A Racing "REAR" LCA's Painted black, USED about 10k ----
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Re: FS: B/O on all... STUFF TO GO
Originally posted by Hyperspeed97z28
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) TSU81 is the part # non gm -- gp sorensen from advance.... ---
SPRINGS : Front & Rear out of my 97 Z/28 90k ----
(1) Stock 28mm front / (1) 19mm Rear Swaybar ---
(1) Steel driveshaft, from a 97 m6 ---
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)--Pending Payment*
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) TSU81 is the part # non gm -- gp sorensen from advance.... ---
SPRINGS : Front & Rear out of my 97 Z/28 90k ----
(1) Stock 28mm front / (1) 19mm Rear Swaybar ---
(1) Steel driveshaft, from a 97 m6 ---
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)--Pending Payment*
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Thread
Thread Starter
Forum
Replies
Last Post
cmsmith
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Sep 14, 2015 09:09 PM
jackpawt883
LT1 Based Engine Tech
7
Sep 10, 2015 08:53 PM
Cbr02
Parts For Sale
0
Aug 24, 2015 07:12 AM
