FS: B/O on all... STUFF TO GO
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
FS: B/O on all... STUFF TO GO
Best Offer PLUS SHIPPING COSTS or pick-up on these parts gets em :
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) non gm -- gp sorenso from advance.... ---
SPRINGS : Front & Rear out of my 97 Z/28 90k ----
(1) Stock 28mm front / (2) 19mm Rear Swaybars ---
(1) Steel driveshaft, from a 97 m6 ---
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
97 Z/28 Stock Exhuast Manifolds : L & R sides with the air fittings attached still ---
LT1 coolant sensor, not the one that goes in the driver side head (BRAND NEW) non gm -- gp sorenso from advance.... ---
SPRINGS : Front & Rear out of my 97 Z/28 90k ----
(1) Stock 28mm front / (2) 19mm Rear Swaybars ---
(1) Steel driveshaft, from a 97 m6 ---
Stock Shifter w/ **** (m6)----
Gray/ Silver Lug Nut Covers for 16inch stock z/28 rims (97 style) --- (lug nut covers only, no rims or center caps) ***only 19 caps out of the 20***
Stock attenna --- (non power)
Catback from 94z minus the I-pipe and Tips ---
Front Liscense Plate Holder for 93-97 Camaro's ( no screws)---
Broke 10 bolt rear end w/ 3.73's --- Complete minus brakes....
1 factory torque arm off a 1995 M6 ---
(1) LT1 Flexplate ---
94-97 Fuel Pump unit--- Complete, All you gotta do is install it and install your fuel lines --- (STOCK UNIT w/45k)
I may have more stuff, I'll have to look around....
Best offer on this stuff plus shipping costs or you can pick it up locally....
PM ME OR EMAIL ME FOR QUESTIONS ETC.....
-Keith
Last edited by Hyperspeed97z28; Jul 5, 2004 at 10:51 PM.
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Originally posted by americanmusscle
Lug Nut Covers for 16inch stock z/28 rims (97 style) ---
Do you have the pics for these? Are these the zr1 style or salad shooter style??
Lug Nut Covers for 16inch stock z/28 rims (97 style) ---
Do you have the pics for these? Are these the zr1 style or salad shooter style??
this is the style rim they came off of :
http://cgi.ebay.com/ebaymotors/ws/eB...category=43956
Thread Starter
Registered User
Joined: Dec 2001
Posts: 3,615
From: Upstate, NY (Albany area)
Originally posted by americanmusscle
You have all four right?? If yes how much for all four?
You have all four right?? If yes how much for all four?
I think you mean all 20 of the lugnut covers??? if so then yes
I dont have the center caps or the rims...
$15 shipped should do it for the lug nut covers though...
Registered User
Joined: Feb 2002
Posts: 684
From: Phoenix,Az
Originally posted by Hyperspeed97z28
I'm confused by all four ??
I think you mean all 20 of the lugnut covers??? if so then yes
I dont have the center caps or the rims...
$15 shipped should do it for the lug nut covers though...
I'm confused by all four ??
I think you mean all 20 of the lugnut covers??? if so then yes
I dont have the center caps or the rims...
$15 shipped should do it for the lug nut covers though...
Registered User
Joined: Nov 2002
Posts: 4,784
From: Jacksonville
.
