Forged 383ci LT1/4 -- Zero Miles
Forged 383ci LT1/4 -- Zero Miles
SOLD!!!!!
ERE#3 For Sale.....the B-body guys Karl Ellwein's work quite well .
This engine was recently professionally rebuilt (by Long's Machine Shop, San Antonio, Tx) due to a blown head gasket. The block, crank, pistons and rods were all inspected/cleaned and the cylinders were rehoned. Block did not require leveling of the deck. Block has zero miles since rebuild.
The engine features the following:
Ohio Crank forged 4340 steel 3.75 inch crank (re-polished)
Eagle Forged 6.0-inch H-beam Rods
Mahle Flattop Pistons with -16 Valve Reliefs
Milodon Splayed caps
Clevite Bearings
Mahle Rings
New Stock Oil pan
New Melling M-55 HV oil pump
11.14 static compression ratio if you go with .030" head gaskets and 54cc heads
Quench will be .036" w/.030" compressed gasket
Custom cam; 228/234/110 with .611 lift on both intake and exhaust using 1.6 rockers
Of course, you can always remove the cam and use what ya want .
$3500 shipped via UPS Freight to the Lower 48 States.
Thx!
KW
ERE#3 For Sale.....the B-body guys Karl Ellwein's work quite well .
This engine was recently professionally rebuilt (by Long's Machine Shop, San Antonio, Tx) due to a blown head gasket. The block, crank, pistons and rods were all inspected/cleaned and the cylinders were rehoned. Block did not require leveling of the deck. Block has zero miles since rebuild.
The engine features the following:
Ohio Crank forged 4340 steel 3.75 inch crank (re-polished)
Eagle Forged 6.0-inch H-beam Rods
Mahle Flattop Pistons with -16 Valve Reliefs
Milodon Splayed caps
Clevite Bearings
Mahle Rings
New Stock Oil pan
New Melling M-55 HV oil pump
11.14 static compression ratio if you go with .030" head gaskets and 54cc heads
Quench will be .036" w/.030" compressed gasket
Custom cam; 228/234/110 with .611 lift on both intake and exhaust using 1.6 rockers
Of course, you can always remove the cam and use what ya want .
$3500 shipped via UPS Freight to the Lower 48 States.
Thx!
KW
Last edited by KW Baraka; May 18, 2013 at 03:13 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



