I will be getting this motor back from the machine shop here in a couple of weeks and i was wanting to see if there is any interest in it. Here is what it will be:
1998 LS1 Block 3.903 Bore
Stock 30k mile crank
Eagle H-Beam Rods 6.098
ARP Rod bolts
Weisco Pistons 3.903 bore
Total Seal Rings
Clevite H-Series Race bearings
New GM Main Bolts
LS6 Oil Pump 6k miles
LS2 Timing Chain 6k miles
New GM Lifters
98 Heads cleaned up with a little polish work
918 Springs w/ Ti Retainers
LS6 Intake w/o EGR
Ported TB
Taylor 10.4 Wires
K&N FIPK Intake System
Pacesetter LT Headers !EGR
Pacesetter ORY

I dont have a cam at this time but i might have a TREX in the next couple of weeks. I dont really know what this should be worth. I will part out everything but if it doesnt sell in a couple of weeks. I would also make trades, just let me know what have.