z28coprice

Had a '97 SS Camaro LT1 in my '94 9C1, recently sold the car, and i still have this heads/intake pkg. off of it. It MUST be sold in order for me to getting the final parts for my '05 GTO APS Twin Turbo install. I am selling the following for $1,100.00. May take $1,050.00 for it.
Included are LT1 aluminum heads, bracket port, polish, gasket match, angle valvejob, Ferrea 6000 2.0/1.6 valves, #614 valvesprings(need to be replaced), milled, and spring pads enlarged for bigger springs. Intake is a '94 LT1 intake, with a street port, polish, gasket match, and includes 30lb. SVO injectors installed. Great combo for street pkg. also included are installed guideplates, comp cams 7/16" rocker studs, comp cams 7/16" Magnum rocker arms, 1.6 ratio, non-self aligning(made for cams with more than .550" lift). Also includes a complete set of EX pushrods, std. length. All you need is your cam/springs and gaskets to install. This combo made 298hp/295lb.of tq at 4,000rpm at the wheels on my '94 caprice with bolt ons, CC306 cam, 2800 stall, and 3.42 gears. Couldn't pull past that rpm because of stock LT1 knock module, it pulled timing from louder valvetrain. I swapped over to an LT4 km but never made it back to the dyno. The motor would pull to 6,700 rpms with that cam. This combo must be sold to help me get my turbos on my GTO. Please reply or pm me with any more information. See my cardomain page(7/8) for pics of what they look like as fresh from the shop.