asking 500.00
i had some clearnace issues in my block. So we had to bore it over to .040. hence i needed new pistons, so these are for sale. some pics and all of the specs are included. they have less than 100 miles on them. there are some scuffs on the skirts but i was told by 2 local builders they are not a issue.
http://img59.imageshack.us/img59/5674/sideshotm.jpg
http://img694.imageshack.us/img694/5112/pistontop.jpg
http://img199.imageshack.us/img199/1066/pistonskirt.jpg
http://img39.imageshack.us/img39/548/pistonside2.jpg
http://img580.imageshack.us/img580/7...artnumbers.jpg
http://img696.imageshack.us/img696/8...stonbottom.jpg
the diamond part number is stamped on the piston. if you want futher info feel free to call them and ask them. i also have the pdf they emailed me on the piston if you need it. it is a custom piston and not on their website
SB chevy 4.0300
C height 1.130
eff vol +0.40cc
intake pocket depth 0.320
exhaust pocket depth 0.240
top ring size 1/16
top ring radial 0.191
2nd ring size 1/16
2nd ring radial 0.188
oil ring size 3/16
oil ring radial 0.190
wrist pin dia 0.927
wrist pin length 2.750
lock ring type double spiro ( 2 per side)
no offset on pin
installed clearance 0.0060
piston flat point 0.850
no weight on spec sheet

 

What rod length and stroke?

 

they are for a 6 inch rod.

 

What stroke? Wrist pins included? What is the part number? Can't see that in the pics. Thanks.

 

What stroke? Wrist pins included? What is the part number? Can't see that in the pics. Thanks.

 

oh sorry man was busy when i replied .
it was for a 3.75 and yes to the wrist pins. if you want pm me your phone number and ill take a bunch of pics right now for ya and send them to ya. 29011 is the piston job number through diamond