SOLD!
here is a good cam for an LT1 that I have and won't be needing due to purchasing a brett bauer custom grind... only has about 5,000 miles on it
Can get pics upon request. 215.00 shipped!
summit sells this cam for 275.00

Part Number: 104227 Grind Number: POWERMAX 2033
Engine Identification:
Start Yr. End Yr. Make Cyl Description
1994 Up CHEVROLET 8 FOR 94 AND LATER ALUMINUM HEAD EQUIPPED LT1 CAMAROS, FIREBIRDS AND CORVETTES. WORKS IN STOCK AND MILD MODIFIED ENGINES. BOOSTS MID AND TOP END WITHOUT LOW END LOSS. USE 10758-16 1.6 RATIO ROCKER ARMS FOR MORE POWER. NOT FOR USE W/STOCK SPRINGS. FOR MASS AIR F.I. ONLY. BASIC RPM 2000-6000

Valve Setting: Intake .000 Exhaust .000 HOT

Lift: Intake @Cam 319 @Valve 479 All Lifts are based
on zero lash and theoretical rocker arm ratios.
Exhaust @ Cam 345 @Valve 518
Rocker Arm Ratio 1.50

Cam Timing: TAPPET @.004
Lift: Opens Closes ADV Duration
Intake 25.0 BTDC 67.0 ABDC 272.0 °
Exhaust 76.0 BBDC 30.0 ATDC 286.0 °

Spring Requirements: Triple Dual Outer Inner
Part Number 99893
Loads Closed 130 LBS @ 1.850 or 1 27/32
Open 314 LBS @ 1.360
Recommended RPM range with matching components
Minimum RPM 1500
Maximum RPM 5700
Valve Float 6300

Cam Timing: TAPPET @.050
Lift: Opens Closes Max Lift Duration
Intake (2.0) ATDC 32.0 ABDC 107 210.0 °
Exhaust 49.0 BBDC (5.0) BTDC 117 224.0 °

 

No one's interested in a cam?

 

do you have any track times with it

 

I have not had it in a motor... it came with the car I bought. this is a street/strip cam.

 

This is still for sale...

 

200.00 Shipped!!

 

175.00 shipped! I need this thing sold!