Car totaled, need to get rid of stuff I have done to it! Wheels, exhaust, hood

Thread Tools
 
Search this Thread
 
Old Jun 21, 2004 | 09:06 PM
  #1  
zennx's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 41
From: Bear, DE, USA
Car totaled, need to get rid of stuff I have done to it! Wheels, exhaust, hood

Car was totaled, I'd like to atleast get some cash for my hard earned work over the years, state farm isn't even giving me book value for the car. Heres some stuff i'm selling.

1. I have a full flowmaster catback exhaust. For now, I'm just gonna try to get the the rear-section off. I'll try to get it off as a catback, but I won't know if I can or not. If anyone is interested in the entire catback please let me know. Some info, the catback was installed not too long ago probably 6 months ago. Completely welded up, one of the best weld jobs i've ever seen. It is the flowmaster lt1 kit. I also have a brand new stock OEM cat on it with less than 5k miles. The tips on the rear section are 3.5inch magnaflow 18" long slashcut rolled edge tips. The catback cost me $299, and the tips cost me around $80, not to mention to have everything installed.

Rear section i'd like to get $130 shipped for it. For the muffler alone is $90 and the tips would be $80, plus shipping. I will make the cut for you right where the overaxle connects. I will ship the entire section in a hood box with everything still attached.

Complete catback: If you are interested in the whole thing, please just email me and I can work out a deal with you, if i can get it off!

This is one of the best looking exhaust systems around i've seen!







2. I have 3 eagle 077 Polished Aluminum 17inch wheels for sale. They are about a year old. One was wrecked in my accident. So all you'd have to do is buy another one. The wheels are about a year old. Both rear wheels have 2 BFG Comp T/A 245/50/17HR tires on the back, the tires are almost brand new. The front wheel that is still good i will have to sell without a tire because it is too worn down for use. If you are interested in just 2 wheels, that is fine with me also. I'm still very unsure of what to ask but I will try to figure this out. I paid around $550 for the wheels brand new, the BFGs on the back were $230 after mounting and balancing. And your getting 3 wheels and both tires. I'd like to get $300 for the wheels, lets say $450 for all 3 wheels and 2 tires. Keep in mind i paid $1200 total for wheels and tires. 17inch tires aren't cheap. The wheels are in great condition, however the 2 rear ones have a very minor ridge around them from where they mounted the tires. It's very minor.



<- 1 day before my accident


3. I am still working on it, but I also have a '93-'97 SS hood that is in good condition I could possibly work on getting. The car is probably leaving soon since I am not parting it out, and I need to find a replacement hood, which I don't have. I may not beable to get this. But, however if you are interested i'd like to know, so I can work fast before they take it. The hood isn't a OEM SS hood, it's an aftermarket one, and i'm not sure who made it, it was on the car when I bought it. Hood is in good condition. Let me know!



I also have other things I can take off the car. Like indiglo gauges, aluminum bezel, I have other parts I can replace onto it and take off the good ones too if anybody wants anything. Mirrors, and stuff like that, i've replaced many parts on the car. Please please please act now because I go on vacation this friday and the car is probably going to be leaving before then, I will get what I can, but I need to know who is interested!

All prices are negotiable! Please feel free to contact me at zennx@yahoo.com if you have any ?s or are interested in anything! I need all the money I can for my new car when I get back from florida
Old Jun 21, 2004 | 09:45 PM
  #2  
SiDeWaYZz28's Avatar
Registered User
 
Joined: Jul 2003
Posts: 2,006
From: (SHOWING U MY TAILIGHTS)FaiRFieLD CaLiFoRNiA
ok i need 2 sensors....the one sensor that plugs into the back of the alternator and the coolents temp sensor thats on the drivers side of the block right next to the manifold in between the first port and middle 2 ports....how much will you do shipped to cali??let me know thanks
Old Jun 21, 2004 | 10:04 PM
  #3  
zennx's Avatar
Thread Starter
Registered User
 
Joined: Nov 2002
Posts: 41
From: Bear, DE, USA
I'm sorry, i'm not parting out the car, just the mods I have done. Insurance company is taking the car in the next few days. It's a 3.8L too by the way.
Old Jun 21, 2004 | 11:36 PM
  #4  
deadmeat2004's Avatar
Registered User
 
Joined: Jul 2003
Posts: 907
From: Oklahoma
lookin for more info on the hood. please pm me. thanks.
Old Jun 22, 2004 | 09:31 PM
  #5  
CHRISCAMARO's Avatar
Registered User
 
Joined: Apr 2003
Posts: 206
From: PHILLY
i am interested in entire exhaust and tips-i emailed you
Old Jun 22, 2004 | 09:41 PM
  #6  
95BlownZ's Avatar
Registered User
 
Joined: Jan 2003
Posts: 9
From: PA
I would be interested in the hood if it becomes available. Let me know.
Old Jun 22, 2004 | 10:04 PM
  #7  
1984camaroz28's Avatar
Registered User
 
Joined: Oct 2002
Posts: 3,958
From: Middeltown NY
can i get the triangle pices that cover the mirrow bolts on the door
Old Jun 25, 2004 | 05:56 AM
  #8  
CHRISCAMARO's Avatar
Registered User
 
Joined: Apr 2003
Posts: 206
From: PHILLY
yo bro, sent you an email? is the car still totalled? haven't heard from you on the exhuast
Old Jun 25, 2004 | 03:28 PM
  #9  
1984camaroz28's Avatar
Registered User
 
Joined: Oct 2002
Posts: 3,958
From: Middeltown NY
Originally posted by 1984camaroz28
can i get the triangle pices that cover the mirrow bolts on the door
Old Jul 5, 2004 | 10:29 AM
  #10  
CHRISCAMARO's Avatar
Registered User
 
Joined: Apr 2003
Posts: 206
From: PHILLY
this stuff still for sale?? i am interested in the exhaust
Old Jul 5, 2004 | 06:55 PM
  #11  
StickMaster's Avatar
Registered User
 
Joined: Apr 2003
Posts: 368
From: Hellaware
Yea, this stuff is still for sale....Hes been away on vacation, he's either coming back today or tommorow.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
browenb
Parts Wanted
1
Dec 23, 2014 04:43 PM
cmdeshon
New Member Introduction
3
Dec 12, 2014 10:51 PM
PFYC
Supporting Vendor Group Purchases and Sales
0
Dec 4, 2014 11:56 AM
USAirman93
General 1967-2002 F-Body Tech
4
Nov 24, 2014 03:37 PM
BIGCOWL-IMP
Midwest
0
Nov 21, 2014 09:40 AM




All times are GMT -5. The time now is 03:33 PM.