Bunch Of Stuff 4 Sale
#1
Bunch Of Stuff 4 Sale
From Scoggin Diggy, a set of Vortec Heads with upgraded z28 springs good to .570 lift. ZZ4 Cam (.474intake/.510exaust lift) 208/221 duration. Last But not least a Performer RPM Air Gap intake manifold for vortec heads. Selling total package for $700obo.
Also have a set of 1.6 crane gold roller rockers, narrow body self aligning type. Selling for $200obo
I have for sale, for a carbed car, a NOS Power Shot Nitrous Kit (Wet Type). Rated at 125 horses to the wheel(s).
Comes With
-15lb NOS Bottle (Full, 10lb Capacity) w/ Bottle Bracket
-Nitrous Plate, Will Fit Square or Spread Bore Type Intake Manifolds/Carburetors
-NOS Power Shot Fuel Solenoid
-Pressure Tested Braided Nitrous Line
-NOS Shifter **** W/ Button
Also have the Nitrous Solenoid which I will throw in if you want however it is shorted out and either needs a rebuild or a new noid all together, your choice on what you want to do.
Selling for $250obo
Edelbrock TES Headers 1 5/8" Primaries, 2 1/2" Collectors with Y pipe dual 2 1/2" Inlets and Single 3" Outlet for single cat now also for sale.
Headers had AIR tubes but were cut off and welded closed (clean job). For a third gen camaro. Part # 6872
Selling for$200obo
Also have a set of 1.6 crane gold roller rockers, narrow body self aligning type. Selling for $200obo
I have for sale, for a carbed car, a NOS Power Shot Nitrous Kit (Wet Type). Rated at 125 horses to the wheel(s).
Comes With
-15lb NOS Bottle (Full, 10lb Capacity) w/ Bottle Bracket
-Nitrous Plate, Will Fit Square or Spread Bore Type Intake Manifolds/Carburetors
-NOS Power Shot Fuel Solenoid
-Pressure Tested Braided Nitrous Line
-NOS Shifter **** W/ Button
Also have the Nitrous Solenoid which I will throw in if you want however it is shorted out and either needs a rebuild or a new noid all together, your choice on what you want to do.
Selling for $250obo
Edelbrock TES Headers 1 5/8" Primaries, 2 1/2" Collectors with Y pipe dual 2 1/2" Inlets and Single 3" Outlet for single cat now also for sale.
Headers had AIR tubes but were cut off and welded closed (clean job). For a third gen camaro. Part # 6872
Selling for$200obo
#2
Re: Bunch Of Stuff 4 Sale
Will trade for 00-03 gsxr 750 forks/frame and/or a small block chevy 400 forged crank with a 1 piece rear main seal and internally balanced. Depending on what there will be +/- money given/taken.
#3
Re: Bunch Of Stuff 4 Sale
Well guys I just figured out why my motor hydrolocked the other nite. Got my heads off today and the #5 intake valve dropped. My piston is shattered and there is a huge hole in the cylinder wall. That bottom end had under 500 miles on it ) Anywayz the passenger side cylinder head is still fine and dandy except it looks like there is one weak spring on it because the valve isnt seating anymore. The driver side head is just as good except in cylinder #5 the combustion chamber is scard and there is a little dent with a crack in it that got threw to the water passage way in the head about half the size of a dime. Should be a very cheap/easy fix, however it does change things. If anybody were to buy these heads I would change all the valve springs just to be safe. New Price $350 for Intake/heads. Cam I cant even pull out right now. Will sell later if there is no damage to it.
$350 FOR Both Heads and Intake Manifold. My loss is your gain. Will try to get pics soon.
$350 FOR Both Heads and Intake Manifold. My loss is your gain. Will try to get pics soon.
#5
Re: Bunch Of Stuff 4 Sale
#13
Re: Bunch Of Stuff 4 Sale
K guys RRs are sold and so is the performer rpm air gap intake manifold. Still have some Edelbrock TES Headers with Y pipe for a third gen camaro for sale 150obo. Also have a NOS Power Shot Kit Still Up For Grabs 250obo. Vortec heads also for sale but those are pick up only, dont wanna be bothered selling some 60lb blocks.
Thread
Thread Starter
Forum
Replies
Last Post
[New Jersey] Cure those winter blues with the NJFBOA!!!
njspder
Middle Atlantic
0
01-08-2015 11:13 AM