Built 4L60E for Sale
#1
Built 4L60E for Sale
Hello,
In the next month I will be pulling the trans out of my car.
The trans is a 1994 4L60E that was built by Finish Line Transmissions. Its been in my car for 2 years and has roughly 1,500 miles on it. My car is just a street/show car that gets driven very rarely and only in the summer.
This is FLT's level 3 build. According to their website:
FLT machined performance pump.
Media blast case, bell housing, and tail housing to restore a new aluminum finish. Prep case for assembly.
8 B/W hi-energy clutches w/koleen steels in 3-4 clutch
Seal & gasket kit
Bushing kit
Alto wide 2-4 red lined band with reinforced anchor
Bonded pistons/input drum
Sonnax SmartShell kit w/bearing
Extra Wide Heavy Duty double caged 29 element sprag
4L65 low roller clutch
Corvette servo
New solenoids
New internal wiring harness
New Spacer plate
B/W clutches
Updated aluminum accumulator pistons
FLT calibrated valvebody
Filter
Set end play to FLT specs
Case cooler fittings
The transmission is perfect and is still basically new. I added a B&M aluminum pan with drain plug for easy fluid changes.
I paid over $1,500 for this trans and another $100 or so for the pan.
When I bought the trans, I also bought a Yank SS 3200 converter and their SFI approved Flex Plate. These items are also for sale. I paid over $800 for these items.
I will also throw in a B&M cooler and an Autometer C2 Trans Temp gauge. Paid over $300 for these items.
I will let this all go for $1,500. Im not really negotiable here. Its a great set up from a very reputable builder with very little mileage and no race abuse. Everything looks and works like they are brand new. My loss is your gain.
I will ship, but you must make the arrangements. I can put this on a pallet and drop off at a freight terminal to save you some money on shipping.
I prefer to sell this as an entire package. If it doesnt sell in a reasonable time frame, I will sell off the parts individually.
I am in Queens, NY if anybody local wants to pick it up or take a ride in the car to verify how flawless this thing works.
Thanks for looking. Please feel free to ask any questions or PM me.
In the next month I will be pulling the trans out of my car.
The trans is a 1994 4L60E that was built by Finish Line Transmissions. Its been in my car for 2 years and has roughly 1,500 miles on it. My car is just a street/show car that gets driven very rarely and only in the summer.
This is FLT's level 3 build. According to their website:
FLT machined performance pump.
Media blast case, bell housing, and tail housing to restore a new aluminum finish. Prep case for assembly.
8 B/W hi-energy clutches w/koleen steels in 3-4 clutch
Seal & gasket kit
Bushing kit
Alto wide 2-4 red lined band with reinforced anchor
Bonded pistons/input drum
Sonnax SmartShell kit w/bearing
Extra Wide Heavy Duty double caged 29 element sprag
4L65 low roller clutch
Corvette servo
New solenoids
New internal wiring harness
New Spacer plate
B/W clutches
Updated aluminum accumulator pistons
FLT calibrated valvebody
Filter
Set end play to FLT specs
Case cooler fittings
The transmission is perfect and is still basically new. I added a B&M aluminum pan with drain plug for easy fluid changes.
I paid over $1,500 for this trans and another $100 or so for the pan.
When I bought the trans, I also bought a Yank SS 3200 converter and their SFI approved Flex Plate. These items are also for sale. I paid over $800 for these items.
I will also throw in a B&M cooler and an Autometer C2 Trans Temp gauge. Paid over $300 for these items.
I will let this all go for $1,500. Im not really negotiable here. Its a great set up from a very reputable builder with very little mileage and no race abuse. Everything looks and works like they are brand new. My loss is your gain.
I will ship, but you must make the arrangements. I can put this on a pallet and drop off at a freight terminal to save you some money on shipping.
I prefer to sell this as an entire package. If it doesnt sell in a reasonable time frame, I will sell off the parts individually.
I am in Queens, NY if anybody local wants to pick it up or take a ride in the car to verify how flawless this thing works.
Thanks for looking. Please feel free to ask any questions or PM me.
#4
Re: Built 4L60E for Sale
Yup. Its all still in the car. I see ur in Delaware. Not far from me at all. I'm in queens ny. Best to get me via email. Cspiridis@hotmail.com
#5
Re: UPDATED - Built 4L60E for Sale
Alright, all this stuff is out of the car and Im moving so need it gone.
Revised Pricing:
Trans: $800
Converter: $450
Flexplate: $50
Temp Gauge: $100
Cooler: $50
Prices do not include shipping.
Make offers via email: cspiridis@hotmail.com
Just took pics of everything so just ask and I will email them.
Thanks Guys, these are very good deals.
Revised Pricing:
Trans: $800
Converter: $450
Flexplate: $50
Temp Gauge: $100
Cooler: $50
Prices do not include shipping.
Make offers via email: cspiridis@hotmail.com
Just took pics of everything so just ask and I will email them.
Thanks Guys, these are very good deals.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
01-23-2015 01:13 PM