Brand New 64cc Aluminum Heads
Thread Starter
Registered User
Joined: Aug 2001
Posts: 16
From: Dublin, CA
Brand New 64cc Aluminum Heads
Brand NEW, never installed, Pro Topline Aluminum heads Ported/Polished and Flowed SBC heads...
ProTopLine 123-4000
64cc chamber, 180 runners before port work
2.08"/1.625 valves. New Springs set up for Hydralic roller cam.
Flow numbers:
Intake: Lift / cfm@ 28” /%flow (numbers below are in this order)
103/64.9/89%; 205/135.3/92%; 308/195/88%; 411/232/92%;
514/262.4/97%; 616/275.9/98%
Exhaust: Lift / cfm@ 28” /%flow (numbers below are in this order)
080/38.6/88%; 160/86/98%; 240/124.7/94%; 320/166.4/94%;
400/183.9/98%; 480/190.1/98%
Perfect for 355,383 or 406. These heads flow and will work well with large cam and built bottom end.
I have pics and flow sheet. Email me if interested at tgearhart@hiscoinc.com
Asking $1800 shipped.
Thanks
Tim
ProTopLine 123-4000
64cc chamber, 180 runners before port work
2.08"/1.625 valves. New Springs set up for Hydralic roller cam.
Flow numbers:
Intake: Lift / cfm@ 28” /%flow (numbers below are in this order)
103/64.9/89%; 205/135.3/92%; 308/195/88%; 411/232/92%;
514/262.4/97%; 616/275.9/98%
Exhaust: Lift / cfm@ 28” /%flow (numbers below are in this order)
080/38.6/88%; 160/86/98%; 240/124.7/94%; 320/166.4/94%;
400/183.9/98%; 480/190.1/98%
Perfect for 355,383 or 406. These heads flow and will work well with large cam and built bottom end.
I have pics and flow sheet. Email me if interested at tgearhart@hiscoinc.com
Asking $1800 shipped.
Thanks
Tim
Thread
Thread Starter
Forum
Replies
Last Post
Brandon Wittmer
General 1967-2002 F-Body Tech
0
Dec 7, 2014 12:15 PM