Baer Bump Steer Kit, Motor Mounts, Swaybar Mounts
Thread Starter
Registered User
Joined: Apr 2002
Posts: 537
From: Pittsburgh, PA
Baer Bump Steer Kit, Motor Mounts, Swaybar Mounts
All items sold. Thank you for your interest.
Used Baer F-Body Bump-Steer Kit - Tie Rod Ends
General Description Here:
http://www.baer.com/products/tie-rods/index.php
Picture Here:
http://rides.webshots.com/photo/2965...42620437ZHgyWn
Similar Part Listed Here:
http://www.summitracing.com/parts/BAE-3301011 - listed for $165.00 plus shipping
Note that mine are red and the current ones are black.
These were removed from my 1997 Trans Am during a dispute with my alignment shop. I upgraded the front LT1 brakes to LS1 brakes using pieces from a salvage yard. I dropped the car off at the shop for an alignment and the owner claimed he couldn't align the car using these so I went ahead and told him to replace them with the stock pieces. As it turned out, one of the salvage yard spindles were bent and this was the source of the problem. However, by the time I figured this out, the replacement tie rod ends were on the car, it was aligned so I just put these on the shelf. Note that according to the Summit listing, this will fit LT1 and LS1 f-bodies.
Bump Steer Kit - Sold.
New In Box Energy Suspension P/N 3.1116G - Polyurethane Clam Shell Type Motor Mount, Black - listed for $24.95 plus shipping
http://www.summitracing.com/parts/ENS-3-1116G/
(Check your application!)
New In Box Energy Suspension P/N 3.1127G - Polyurethane Motor Mount Insert, Black - listed for $24.95 plus shipping
http://www.summitracing.com/parts/ENS-3-1127G/
(Check your application!)
Both motor mount pieces - Sold.
Swaybar Bushings - Sold
Used Baer F-Body Bump-Steer Kit - Tie Rod Ends
General Description Here:
http://www.baer.com/products/tie-rods/index.php
Picture Here:
http://rides.webshots.com/photo/2965...42620437ZHgyWn
Similar Part Listed Here:
http://www.summitracing.com/parts/BAE-3301011 - listed for $165.00 plus shipping
Note that mine are red and the current ones are black.
These were removed from my 1997 Trans Am during a dispute with my alignment shop. I upgraded the front LT1 brakes to LS1 brakes using pieces from a salvage yard. I dropped the car off at the shop for an alignment and the owner claimed he couldn't align the car using these so I went ahead and told him to replace them with the stock pieces. As it turned out, one of the salvage yard spindles were bent and this was the source of the problem. However, by the time I figured this out, the replacement tie rod ends were on the car, it was aligned so I just put these on the shelf. Note that according to the Summit listing, this will fit LT1 and LS1 f-bodies.
Bump Steer Kit - Sold.
New In Box Energy Suspension P/N 3.1116G - Polyurethane Clam Shell Type Motor Mount, Black - listed for $24.95 plus shipping
http://www.summitracing.com/parts/ENS-3-1116G/
(Check your application!)
New In Box Energy Suspension P/N 3.1127G - Polyurethane Motor Mount Insert, Black - listed for $24.95 plus shipping
http://www.summitracing.com/parts/ENS-3-1127G/
(Check your application!)
Both motor mount pieces - Sold.
Swaybar Bushings - Sold
Last edited by KeithO; May 24, 2010 at 09:03 AM.
Thread Starter
Registered User
Joined: Apr 2002
Posts: 537
From: Pittsburgh, PA
Thread Starter
Registered User
Joined: Apr 2002
Posts: 537
From: Pittsburgh, PA
I received the payment, Eric, and I will drop these off at the UPS store during my lunch hour. Once I have the tracking information, I will e-mail it to you. I also realized that I left the instructions at home and will scan them in and e-mail them to the Paypal e-mail address this evening or tomorrow morning at the earliest.
Thanks to everyone for your interest.
Thanks to everyone for your interest.
Thread
Thread Starter
Forum
Replies
Last Post
