BADCHRY leftovers for sale
Thread Starter
Registered User
Joined: Feb 2000
Posts: 72
From: castaic california
BADCHRY leftovers for sale
I got a few items for sale for the serious racer mainly. all item prices are plus shipping. I take paypal.
Got questions, let me know.
I have Pics of everything, so if you are interested send me your email and what you want to see and i'll get the pics to you.
MSD 6L BTM $235.00 (sold)
MSD 8739 2-Step $50.00 (SOLD)
MSD RPM pills 7000-7800 five total $13.00
Taylor Spiral-pro wires, 8mm 90deg boots for LT1 (red) $60.00 (sold)
Kevlar Spark plug boot protector sleeves (red) $10.00 (sold)
Hypertech 160 thermostat $10.00 (sold)
Timing Cover for 96 LT1 modified for a big block snout w/Opti drive hole and water pump drive holes welded up to run Dist in back. $75.00
Metco ICM (Instant Center Modification Brackets) Put the power to the ground! $55.00 (sold)
Compcams “Solid Roller” Cam, custom grind Lift: I.603 / E .609 Duration: 236 / 242 on a 114 lobe separation for LT1 motor w/opti drive. $150.00 (SOLD)
"Billet Fabrication" Aluminum oil Pan for Impala Chassis with Front notch and Passenger side dip stick. Stroker clearanced with right side power kick out.
Brand new, never had oil in it. Bought from Karl Ellwein of Ellwein Engines in 2/09.
Wound up going with a different engine, couldn't use it. Just want to get what I paid for it $400.00 will provide receipt.
Stefs Aluminum oil Pan for Impala Chassis with Front notch and Passenger side dip stick. Stroker clearanced. Has been run, had no problems with it. it came off when i was going to freshen up the eng, we foung a crack in the block and wound up building an early small block. I did put the LT1 back together with a differend block and wound up using a steel pan on it.
This pan I bought direct from Stefs for $461.72 total (have receipt) will let it go for $300.00
F.A.S.T Bank to Bank Engine managment system W/wideband 02. Complete with piggyback wire in wiring harness from Fast Track Performance. Set up to run with a crank trigger, but can be changed back to use an Optispark. have Instructions and software. $980.00
Phillipvilla@att.net
(661) 993-0265
Thanks,
Phil
__________________
Got questions, let me know.
I have Pics of everything, so if you are interested send me your email and what you want to see and i'll get the pics to you.
MSD 6L BTM $235.00 (sold)
MSD 8739 2-Step $50.00 (SOLD)
MSD RPM pills 7000-7800 five total $13.00
Taylor Spiral-pro wires, 8mm 90deg boots for LT1 (red) $60.00 (sold)
Kevlar Spark plug boot protector sleeves (red) $10.00 (sold)
Hypertech 160 thermostat $10.00 (sold)
Timing Cover for 96 LT1 modified for a big block snout w/Opti drive hole and water pump drive holes welded up to run Dist in back. $75.00
Metco ICM (Instant Center Modification Brackets) Put the power to the ground! $55.00 (sold)
Compcams “Solid Roller” Cam, custom grind Lift: I.603 / E .609 Duration: 236 / 242 on a 114 lobe separation for LT1 motor w/opti drive. $150.00 (SOLD)
"Billet Fabrication" Aluminum oil Pan for Impala Chassis with Front notch and Passenger side dip stick. Stroker clearanced with right side power kick out.
Brand new, never had oil in it. Bought from Karl Ellwein of Ellwein Engines in 2/09.
Wound up going with a different engine, couldn't use it. Just want to get what I paid for it $400.00 will provide receipt.
Stefs Aluminum oil Pan for Impala Chassis with Front notch and Passenger side dip stick. Stroker clearanced. Has been run, had no problems with it. it came off when i was going to freshen up the eng, we foung a crack in the block and wound up building an early small block. I did put the LT1 back together with a differend block and wound up using a steel pan on it.
This pan I bought direct from Stefs for $461.72 total (have receipt) will let it go for $300.00
F.A.S.T Bank to Bank Engine managment system W/wideband 02. Complete with piggyback wire in wiring harness from Fast Track Performance. Set up to run with a crank trigger, but can be changed back to use an Optispark. have Instructions and software. $980.00
Phillipvilla@att.net
(661) 993-0265
Thanks,
Phil
__________________
Last edited by BADCHRY; Oct 8, 2009 at 02:02 PM. Reason: Update
Thread
Thread Starter
Forum
Replies
Last Post
2QUIK6
Parts For Sale
2
Jul 15, 2015 07:46 PM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
1
Mar 13, 2015 07:15 AM
NewsBot
2010 - 2015 Camaro News, Sightings, Pictures, and Multimedia
0
Dec 3, 2014 12:30 PM
