AFR 190's FS $600+shipping
#1
AFR 190's FS $600+shipping
I'm selling my old AFR 190 heads with Crane dual valve springs, they were on a friend's car that made 600rwhp with 15 psi a while back an ran great still more left in her. .
There is a story to these heads where the local shop that did the porting went too far on the port entry areas which then had to be welded. I never bothered cleaning up the ports and just ran them as is, they still made great power and no issues at all. Later I sold the car but had these heads in the closet for years, about 7 years now or so.
Selling them as is, they came off a perfectly working setup, ran head studs but aren't the prettiest intake ports you've seen. The bowl area is fine and they pressure tested before going on the car. They will need to be milled and if I remember correctly about 58cc now.
Anywho as is less than half price I see them selling for $600 plus shipping OBO and they are yours, email me if you want to see pics but I will post them later just finally getting around to cleaning the garage up, will post the D1SC for sale as well.
Ship from Sumas, Washington 98295
Pics here:
http://www3.telus.net/bunker/AFR190/
There is a story to these heads where the local shop that did the porting went too far on the port entry areas which then had to be welded. I never bothered cleaning up the ports and just ran them as is, they still made great power and no issues at all. Later I sold the car but had these heads in the closet for years, about 7 years now or so.
Selling them as is, they came off a perfectly working setup, ran head studs but aren't the prettiest intake ports you've seen. The bowl area is fine and they pressure tested before going on the car. They will need to be milled and if I remember correctly about 58cc now.
Anywho as is less than half price I see them selling for $600 plus shipping OBO and they are yours, email me if you want to see pics but I will post them later just finally getting around to cleaning the garage up, will post the D1SC for sale as well.
Ship from Sumas, Washington 98295
Pics here:
http://www3.telus.net/bunker/AFR190/
Last edited by bunker; 08-01-2015 at 09:34 PM.
#5
Re: AFR 190's FS $600+shipping
SOLD to Justin! Sorry Str8hp I cancelled your payment so you should be able to see that in your paypal account.
Thanks guys and I apologize in advance to Str8hp I couldn't tell if you were serious or not maybe it's because I've been so busy lately.
Thanks guys and I apologize in advance to Str8hp I couldn't tell if you were serious or not maybe it's because I've been so busy lately.
#7
Re: AFR 190's FS $600+shipping
Got the heads yesterday, thanks for the fast shipping! Gonna put some pac 1518 springs, have them cleaned up a bit and get those suckers bolted down with a new cam and try to get it down the track soon. Best time so far is 11.8. (Bolt ons and 150 shot)
Thread
Thread Starter
Forum
Replies
Last Post