Ok unfortenatly no picture of this one as of right now i'm heading down to the machine shop on monday to pick it up so i can have pictures then.

385LT1 Splayed and half filled
4340 Scat Crank
4340 5.7 Eagle Rods
4340 11.4:1 SRP Nitrous pistons with Hellfire Rings
Lt4 timing set
H/D Oil pump
ARP Studs
Dart Pro 1 227cc Heads Converted over (so you can put any SBC intake on it, carburated, fuelinjected whatever)
2.08/1.60 valves
Crane valve springs good up to 750 lift
Cometic head gaskets
Cam Motion Billet Cam was specificly ground for this engine, its a nitrous cam for automatic car with about 850rwhp. 112lca/ 694 lift duration is in the high 250s low 260s,dont have the cam card close by.
Motor needs intake manifold,lifters,rockers, pushrods,oil pan to be completed
motor never ran since its last overhaul, car used to be boosted cracked 2 ringlands but did no damage to the buttom end, we cleaned it up .10 over put new bearings in it and top end.Xrayed the crank/rods/block it was all 100% That alone set me back over 4 grand i have all the recipts.Parting out the whole car so i no longer need it.
All i'm asking is $3400+ shipping a motor like this would cost 7 grand+ some to build from Ground Zero.
Serious buyers only
you can call me at 301-7751811 also
Andre