Here is the list. Best offers (really) plus shipping. Email budebuzz@aol.com me or PM me. I can get pictures quickly if you are interested. I will split any of the parts up depending on what you need.

Parts are from both 97 z28 camaro about 60k miles when parts removed and 89 rs 305 TBI camaro 140K miles.

LT1 stock alternator - was working when replaced but noticed a few times the apms were not all the way up there, never had it tested.

LT1 stock single plug coil - working when replaced with MSD coil some corrosion on the connection but can be cleaned up no problem.

3rd gen used stock fuel injectors (2) for 305 TBI engine, working.

3rd gen used, 1 stock ECM chip by itself and 1 light performance ECM chip with retainer plastic piece to plug right in. Used both on 305 and work fine depending on your application. I had open air intake and unrestricted exhaust.

3rd gen open element air filter , hardly used, 12"x3" (2-3 inch wide) , I also have the stock air intake stuff if you need anything.

3rd gen A.I.R. junk - everything was working when taken off, pump etc. let me know what you need. Muffler with exhaust tip only and CAT.

3rd gen seats - front and rear, (1 rear seat good cond, Drivers seat good but bolster wear through and rear back piece good but top faded, red cloth tweed stuff) the other rear cussion and passenger seat are in bare foam as I was going to recover them but bought other seats. I have mounting sliders and side plastic (dyed black origanally red) for the fronts and rear seatbelt guides for the rear back piece. No seat belts available.

 

I also have 2 1/4 header flanges with blots, new never used , pair.