Up for sale is a small block 383 long block engine. This engine was in a 3900 lb car (with driver) and has been as fast as 11.95 on radials. The engine has less than 1,000 miles on it and 5 passes at the dragstrip. This was in my 79 Camaro.

Here are the specs:
*4.030 bore, 2 bolt main
*3.75" crank, 4130 Scat 9000 steel
*5.7" Scat I beam 4340 rods
*TRW flat top forged pistons (10.5:1)
*Moroso 7 quart pan
*Lunati hydraulic roller camshaft
242/252 Duration @.050 / 525/540 lift / 113 lobe seperation
50162LUN
*Comp Cams R Series Hydraulic roller lifters
885x-16
*World Products sportsman II heads 2.02/1.60 valves, cleaned up nice
*Comp Cams Magnum 080 wall pushrods
*Edelbrock Victor Series Aluminum Water pump
8811
*GM polished valve covers
141-108
*Balancer (internally balanced)

This is a long block engine. It does not come with an intake manifold, rocker arms, or flywheel. I am reusing some of these parts on my new engine, going bigger. This engine is ready to rock and roll, in a lighter car should be easily into the low 11's. The rocker arms, intake, and flywheel are available for extra cost.

$2300 obo
Pickup Preferred but not required, Buyer pays shipping!
pm me for more info.

Thanks, Mike

 

Let me know if you decide t part this out... interested in the cam.