28# Racertonix injectors and LT1 shortblock FS
10-10-2005, 04:03 PM
#1
Registered User
Thread Starter
Join Date: Jun 2003
Location: Herndon, VA
Posts: 528
28# Racertonix injectors and LT1 shortblock FS
Injectors were on the car for less than a year and for only 2.5K. I modified the injectors to accept the injector retainer clips on lt1s. Here is the write up from raceronix website.
Part Number 12561462 (Bosch # 0 280 155 931) - This is a LS1 factory GM EV6 injector.
Static Flow Rate @ 43.5PSI (300kPa) = 28 lb/hr (294cc/min)
Static Flow Rate @ 58PSI (400kPa) = 32 lb/hr (336cc/min)
High Impedance / High-Z (No ECM driver modifications required)
These injectors have been pulled from crate and operating motors. All injectors have been ultrasonically cleaned, back-flushed. O-rings and filter screens have been replaced when required. Some injectors may have minor cosmetic blemishes. All injectors have been flow tested to make sure they are in perfect operating condition. Dynamically flowed and grouped to tighter tolerances than factory with Racetronix injector flow bench.
$150 shipped
LT1 shortblock with stock internals. Motor is in good shape but would need to be cleaned up a bit ie new bearings, rings, etc. PICKUP only, willing to go as far south as st. augustine, fl and north to brunswick, ga.
$450 obo
Part Number 12561462 (Bosch # 0 280 155 931) - This is a LS1 factory GM EV6 injector.
Static Flow Rate @ 43.5PSI (300kPa) = 28 lb/hr (294cc/min)
Static Flow Rate @ 58PSI (400kPa) = 32 lb/hr (336cc/min)
High Impedance / High-Z (No ECM driver modifications required)
These injectors have been pulled from crate and operating motors. All injectors have been ultrasonically cleaned, back-flushed. O-rings and filter screens have been replaced when required. Some injectors may have minor cosmetic blemishes. All injectors have been flow tested to make sure they are in perfect operating condition. Dynamically flowed and grouped to tighter tolerances than factory with Racetronix injector flow bench.
$150 shipped
LT1 shortblock with stock internals. Motor is in good shape but would need to be cleaned up a bit ie new bearings, rings, etc. PICKUP only, willing to go as far south as st. augustine, fl and north to brunswick, ga.
$450 obo
10-14-2005, 04:48 PM
#7
Registered User
Thread Starter
Join Date: Jun 2003
Location: Herndon, VA
Posts: 528
Re: 28# Racertonix injectors and LT1 shortblock FS
Yup but have one infront of ya. Will let you know one way or another.
Rob
Rob
Originally Posted by hoppy95dcmss
Do you still have the injectors?
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM