Thanx bunker
Thread Starter
Registered User
Joined: Sep 2001
Posts: 2,201
From: Montreal, Canada
Thanx bunker
Thanx for slapping that water pump on, very easy precedure cept for the banging and what not. That boiler room is just to handy dandy (andy cuz it rhymes 
) Call tomorrow... free post 
) Call tomorrow... free post
Registered User
Joined: Aug 2000
Posts: 4,305
From: North Vancouver, BC
dude without the right dremel bit it takes hours & hours, it took me about 5 hours on mine & everyone else it takes about the same, its God's gift that dremel of mine 
wish I had it when I did mine.
wish I had it when I did mine.
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
Originally posted by OneFlyn95z28
LOL YUp that Mez is desighned to LEAK!
BAAAAAAA HHAHAHA
BTW What gives? five freaking hours for a two hour job???
LOL YUp that Mez is desighned to LEAK!
BAAAAAAA HHAHAHA
BTW What gives? five freaking hours for a two hour job???
mine has never leaked .. i'll do ur next Meziere install with a no leak garuanteee 
this time it took us 15 minutes all together 
Registered User
Joined: Nov 2001
Posts: 1,087
From: Calgary Alberta Canada
I installed my meziere and it doesn't leak.....trust me, thats say'n something (Mike wired it though) It's all the same stuff...i'd buy the csi now ONLY because its almost $100 cheaper.
Andy
Andy
Registered User
Joined: Aug 2000
Posts: 4,305
From: North Vancouver, BC
Yep Meizier sucks, I looked inside one & the main wire has 45* closed angle bends in it 
thats why it fails every once in a while cuz the wire heats up & cracks there than corrodes, real fun.
Plus Mezier is only made for 1500 hours & CSI is 5000 hours, thats a big difference IMHO.
Reason it takes me so long to file is cuz with a damb file I would make the holes but it would still be hard to go in, it needs to go in fairly easily if you want to be able to take the pump out after a few heat cycles & not have to remove the whole pump housing & just do it on the car. Mezier its no problem except the fans get in the way CSI if you make good ears on the housing has no problem comming out cuz its like half the thickness.
thats why it fails every once in a while cuz the wire heats up & cracks there than corrodes, real fun. Plus Mezier is only made for 1500 hours & CSI is 5000 hours, thats a big difference IMHO.
Reason it takes me so long to file is cuz with a damb file I would make the holes but it would still be hard to go in, it needs to go in fairly easily if you want to be able to take the pump out after a few heat cycles & not have to remove the whole pump housing & just do it on the car. Mezier its no problem except the fans get in the way
CSI if you make good ears on the housing has no problem comming out cuz its like half the thickness.
Registered User
Joined: Nov 2001
Posts: 1,213
From: North Vancouver, BC
Originally posted by bunker
dude without the right dremel bit it takes hours & hours, it took me about 5 hours on mine & everyone else it takes about the same, its God's gift that dremel of mine wish I had it when I did mine.
dude without the right dremel bit it takes hours & hours, it took me about 5 hours on mine & everyone else it takes about the same, its God's gift that dremel of mine
wish I had it when I did mine.
try doing it with a hand file - thats what I used
Thread
Thread Starter
Forum
Replies
Last Post