Official dyno thread !
Thread Starter
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
Originally posted by ollie-99
328.2hp, 322 lb torque
w/ an exhaust leak which me and matt tried fixxin but it leaked during the dyno run
and supposidly a hole in my muffler?
haha
328.2hp, 322 lb torque
w/ an exhaust leak which me and matt tried fixxin but it leaked during the dyno run
and supposidly a hole in my muffler?
haha
my car made 324 with my cutout capped and a CC305 .. i guess the hotcam does make more hp at the top end like they say !
oh .. not to mention ur oil leaks
u made a mess after u left man . get ur oil leaks fixed
Last edited by sideways_Into_3rd; May 25, 2003 at 11:22 PM.
Registered User
Joined: Mar 2002
Posts: 1,834
From: Lower Mainland, BC ,Canada
Originally posted by sideways_Into_3rd
thats a normal hp for ur mods, but ur mph is pretty high !! u should put ur car on the scale and weight it next time out there, i wonder what it weights !
oh .. not to mention ur oil leaks u made a mess after u left man . get ur oil leaks fixed
thats a normal hp for ur mods, but ur mph is pretty high !! u should put ur car on the scale and weight it next time out there, i wonder what it weights !
oh .. not to mention ur oil leaks
u made a mess after u left man . get ur oil leaks fixed
where can u weight it @ mission?
Thread Starter
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
the scale is right next to the booth where u get ur time slips ..
next time on ur way to tech, or after making a run .. goto the "other" side of the timeslip booth .. just roll over the scale and watch the display
next time on ur way to tech, or after making a run .. goto the "other" side of the timeslip booth .. just roll over the scale and watch the display
Classic Tech Moderator
Joined: Apr 1999
Posts: 469
From: Burnaby, BC
You can also weigh it at the weigh scales on Hwy 1. Probably best done at night so you don't pi$$ off truckers.
---
I wish I could have been there.... but mine's not running quite yet. I'd have had it running today, but I needed some wire for my fuel pump, a fitting and other small misc things. Of course I didn't notice this until after stores had closed
. Oh well, next weekend 
---
I wish I could have been there.... but mine's not running quite yet. I'd have had it running today, but I needed some wire for my fuel pump, a fitting and other small misc things. Of course I didn't notice this until after stores had closed
. Oh well, next weekend
Registered User
Joined: Mar 2002
Posts: 1,834
From: Lower Mainland, BC ,Canada
Originally posted by Erik
You can also weigh it at the weigh scales on Hwy 1. Probably best done at night so you don't pi$$ off truckers.
---
I wish I could have been there.... but mine's not running quite yet. I'd have had it running today, but I needed some wire for my fuel pump, a fitting and other small misc things. Of course I didn't notice this until after stores had closed. Oh well, next weekend
You can also weigh it at the weigh scales on Hwy 1. Probably best done at night so you don't pi$$ off truckers.
---
I wish I could have been there.... but mine's not running quite yet. I'd have had it running today, but I needed some wire for my fuel pump, a fitting and other small misc things. Of course I didn't notice this until after stores had closed
. Oh well, next weekend
or can u drive right up on them?
Registered User
Joined: Mar 2002
Posts: 473
From: Victoria, BC, Canada
Originally posted by Drumhawk
Damn it, I missed the dyno.
I didn't get my lazy butt out of bed. That's the time I usually go to bed. The last of the f-bodys should have been there. Next one for sure. 
Damn it, I missed the dyno.
I didn't get my lazy butt out of bed. That's the time I usually go to bed. The last of the f-bodys should have been there. Next one for sure.
Registered User
Joined: Mar 2002
Posts: 1,711
From: Canadian West Coast
Originally posted by Drumhawk
Damn it, I missed the dyno. I didn't get my lazy butt out of bed. That's the time I usually go to bed. The last of the f-bodys should have been there. Next one for sure.
Damn it, I missed the dyno.
I didn't get my lazy butt out of bed. That's the time I usually go to bed. The last of the f-bodys should have been there. Next one for sure.
Registered User
Joined: May 2003
Posts: 5
jeese thats impressive...me and a couple mustang guys were talking about this last night...everyone thinks that mustangs are the poor mans muscle car...put a little money in and get alot of power...well you can spend $5,000 and get 330 rwhp on a mustang...but look at oliver...bougt the hotcam set for like $500, headers for another $500, he has a 12 second car no problem...although they are ugly 
, thats an awesome ROI
, thats an awesome ROI
Thread
Thread Starter
Forum
Replies
Last Post
tdigger9899
General 1967-2002 F-Body Tech
9
Sep 7, 2015 10:56 AM
cmsmith
2016+ Camaro News, Sightings, Pictures, and General Discussion
0
Aug 17, 2015 06:50 PM