MRP tomorrow ? aug 29
Thread Starter
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
Originally posted by bunker
Gerry Charlesworth is going with the wagon
I am 99% aswell, depending on how quickly I can put the coils on
Gerry Charlesworth is going with the wagon
I am 99% aswell, depending on how quickly I can put the coils on
u goin back to the coils ?
we should put on the slicks
just launch off idle and floor it 
Registered User
Joined: Nov 2001
Posts: 1,751
From: Surrey, BC, Can
Take Fraser HWY until it ENDS in a T junction. That will be almost at the Sumas truck crossing. Turn left. Drive for about a mile and you will be right there at the HWY exit.
Once when I was coming home from Missoin I went on the on-ramp and the traffic was STOPED on HWY one.
I backed down the ramp and drove further south, took a right turn and voila, I was on Fraser HWY.
Once when I was coming home from Missoin I went on the on-ramp and the traffic was STOPED on HWY one.
I backed down the ramp and drove further south, took a right turn and voila, I was on Fraser HWY.
Last edited by 97TA-WS6-Con; Aug 28, 2003 at 02:51 PM.
Registered User
Joined: Sep 2002
Posts: 1,251
Originally posted by bunker
Gerry Charlesworth is going with the wagon I am 99% aswell, depending on how quickly I can put the coils on
Gerry Charlesworth is going with the wagon
I am 99% aswell, depending on how quickly I can put the coils on
Edit: Found the setup Pic
Here's the thread
Last edited by SBainsTA; Aug 28, 2003 at 02:13 PM.
Registered User
Joined: Nov 2002
Posts: 246
From: Surrey
Originally posted by 97TA-WS6-Con
Take Fraser HWY until it ENDS in a T junction. That will be almost at the Sumas truck crossinh. Turn right. drive for about a mile and you will be right there at the HWY exit.
Once when I was coming home from Missoin I went on the on-ramp and the traffic was STOPED on HWY one.
I backed down the ramp and drove further south, took a right turn and voila, I was on Fraser HWY.
Take Fraser HWY until it ENDS in a T junction. That will be almost at the Sumas truck crossinh. Turn right. drive for about a mile and you will be right there at the HWY exit.
Once when I was coming home from Missoin I went on the on-ramp and the traffic was STOPED on HWY one.
I backed down the ramp and drove further south, took a right turn and voila, I was on Fraser HWY.
Thread Starter
Registered User
Joined: Feb 2001
Posts: 3,842
From: BC, Canada
Originally posted by 97TA-WS6-Con
Raene: sorry you are correct, turn LEFT
Payam: you have may have missed my post, but given that Harvey would not allow tuning I cancelled my spot and it was taken by Ollie.
Raene: sorry you are correct, turn LEFT
Payam: you have may have missed my post, but given that Harvey would not allow tuning I cancelled my spot and it was taken by Ollie.
i was talkin to SHAWN
and ollie didnt dyno either for the record
