I need a rearend setup for my 99 Z28
I need a rearend for my 99 Z28..3 channel ABS (no traction control).. Perferably with 3.42's.. But at this point, just a housing will do with 3 channel abs support will do.
I live near Portland (in Beaverton). If you are not too far away, I can drive over and pick it up myself..
I'm gonna call up some salvage places and see if they can find one.
Zturbo, you still have a rear available? (although you are a drive away)
Ugh, my car has been down since May 1st....
If anyone has an aftermarket 9" or 12 bolt sepcifically setup for a 4th gen Camaro with 3 channel ABS support on hand, I'd consider that too.
Thanks,
Ken
I live near Portland (in Beaverton). If you are not too far away, I can drive over and pick it up myself..
I'm gonna call up some salvage places and see if they can find one.
Zturbo, you still have a rear available? (although you are a drive away)
Ugh, my car has been down since May 1st....
If anyone has an aftermarket 9" or 12 bolt sepcifically setup for a 4th gen Camaro with 3 channel ABS support on hand, I'd consider that too.
Thanks,
Ken
You might get ahold of Aaron Spitzer. He lives in Tacoma, works at Randy's ring and pinion. He can get a good package price on a 4th gen Moser 12 bolt setup!
Hopefully he will see this, he usually surfs here just does not post much.
If he does not respond to this post I believe his user name is ponykiller.
Ken
Hopefully he will see this, he usually surfs here just does not post much.
If he does not respond to this post I believe his user name is ponykiller.
Ken
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
ddr698
Parts For Sale
3
Jan 31, 2015 10:58 AM



