Over the winter I'll be removing my heads, intake and cam. and selling the entire package.

Currently I have the hot cam kit installed on my car: hot cam, 1.6RR, springs, retainers the whole bit.

My heads have been slightly ported and polished (no flow numbers) and they been matched to the intake. They also have a professional valve (3 angle) grind done to them and are in tip top shape. the heads are otherwise stock and have not been decked. The port job was mainly to clean up some rough spots and and polished to ease the flow - nothing major.

I'm offering the heads, installed hot cam kit (includes GMPP 1.6 Roller Rockers, valve springs, retainers, valve locks & shims), intake and the hot cam itself go for $1,000 Cdn. ($775 US) plus shipping ( for those in Van we can meet at the ferry )

The easiest thing to do is buy my heads and intake and sell yours as they go for ~$250 US and up in the for sale section. That way you cleaned up heads and do not have to fuss with swapping all the little parts over. But I am willing to part out.

The cam is in a '94 LT1 for those with a vented opti the pin would have to be shortened or tapped in (no big deal it's the same kit regardless of opti). I figure the kit and cam have ~1500 kms on it.

I have been very happy with the kit as it is a great value and this mod is a great bang for the buck! The kit was origionally installed by a engine shop in Victoria and the porting and matching was done there as well.

I do not require full payment immediately but I would need confirmation and a solid deposit ensure that you were going to go through with the deal.

I do not have pictures - it looks like a cam and RR and springs and retainers and so on. as mentioned it's on the car which is parked for the season. I am planning on taking my time in removing the stuff but could rush it if need be.

tech specs on the cam with the 1.6RR
Lift (In/Exh) Duration (In/Exh)
.525 / .525 218 / 228
lsa = 112 so it has a nice little lump to it - reprogramming is not required but there are benefits to be gained from tuning.

Reason for selling: upgrading to bigger heads and cam.


Also selling a 3.5" LPE DS see: http://web.camaross.com/forums/showt...hreadid=193494

 

very good deal

 

Put me first inline!!!
I might be keeping my car after all..
When will you be removing the parts??
I'd like to see some pics when you get them out!!

 

Put me second

 

I'll take it if Musky dosen't. Where or who ported the heads and what type valves were put in the heads when they were done?

EDIT: Or Jonny

 

All the engine work was done here in Victoria August 14, 2000 by Cords Engine Specialists - I have 2,654 kilometers on the car since the install - I don't drive it I just mod it

My receipt says $414 to recondition head and intake which included the polishing and slight porting and the valve grind.

I do not see a reference to new valves so I assume the stock ones went back in.

As mentioned this is a winter project but I want to know that these are sold so I can move ahead and do not plan on removing and taking pictures unless they have not sold by that point.

I'm flexible on payment say $400 now and $600 on delivery - your also welcome to come over and help remove them to ensure it's done correctly. I have a spare room and beer is always available.

I don't do dibs or first, second, third, - if your interested talk to me, do a down payment and we can move on - money talks and first come first served.

Needless to say i price these to sell and I'm firm on the price.

 

Sent you a PM

 

have replied

 

Sorry folks this sale is cancelled because I got shafted by a local board member with whom I had made arrangements with to purchase his heads and intake.

I am scrambling to reverse several follow up arrangements I have made but will will try to make other arrangements and bring this offer back.

To those members that expressed an interest and to Shawn whom I had on the phone when I recieved the email backing out of my deal - I apologize and promise to contact you first if i can make it happen

 

I will beat him upside the head for u bill ... it would be my pleasure

 

I made it happen - the heads and cam are sold

 

sold to someone local?? ShawN?

 

Local - yes - I try to not to screw up local members (unlike others who will remain nameless).

I'll let the new owner announce the purchase if he so wishes.