i need some custom valve covers or brackets made up to accomodate some LS1 coils.

 

Hey Roy...not to be mistaken with Patrick Woy ....are you hell bend on the short wires like Matt..because if not you can do the LS1 relocation mod...mount the coils under the cowl...if your serious, I know how it's done...it may save you some headache's...


Mike

 

just to let you know for eg. moroso fabricated aluminum valvecovers are 700.00 CDN and it would be about the same for somebody to make em

 

hey mike you got any pics of the cowl setup? id like to see em first. personally id rather have them on the valve covers, just seems easier to access and is something that should be show off on a lt1.

maybe i should have a custom braket fabricated. can anyone recomend a place?

 

Matt and I were talking about having some bolts welded onto his valve covers...I have a friend that can do that...it's up to you..but that's the only thing I can think of...but you can look on the www.LS1tech.com and do a search on coil pack relocation mod...you'll find lots of pics


Mike

 

thanks, i was thinking the same, having helicoils installed but i still need a custom bracket made up, the driver side is fine but the passenger side has a problem due to the oil fill cap.

 

A LT1 w/ LS1 coil packs i w/ like to know more info also

 

You just wanting flat top fabricated valve covers with tapped areas to mount the coils?

Shoot me a email and i can help ya out some more
Steven

 

I have the composite covers will that coil pack mod work w/ Bowtie/Crane roller rockers .
Or aim I blowing smoke up my azz


Sounds like a killer idea

Thanks for any info


Mike

 

I'll have someone send you some info Mike