Hey guys,

I am going to be hitting the dyno rollers at 330pm today at Rezniks. I am running a 9 PSI non-intercooled setup, and hoping for 450-500 rwhp.

Just giving you guys a heads up in case you want to check it out.

I will NOT be running the Nitrous on top of the blower because I just don't have the fuel pump capacity at this time.

 

nice good to hear!!!
good luck on the rollers

oh btw are u selling ur borla? shoot me a PM

 

Im going to try to stop in for sure !!

 

I wish I could be there Good Luck

My guess is 508rwhp

 

Good luck Craig! I say 478 RWHP .

 

good luck! my guess is 496hp
what do we win if it is right

 

I was off by one HP on Payam's car and I got nothing

 

should be in the 500 rwhp range give or take .. but im still kickin your azz down the track and down the road craig

 

where is Rezniks i would love to check this shat out.

 

The address is 1655 Broadway 120

Basically from North Van take the United Blvd exit right before the Port Mann Bridge, and follow the Mary Hill Bypass until you get to Broadway. Turn left and drive about 1/2km

 

haha i remmeber getting lost thats all

 

well i guess bust it was after all

just buggin ya .. but if u start listening to peoples advice u'll get up there no problem (ignition box and IC)

heres the video (download it cuz i cant keep it on my webspace for long .. need my disk space for assignments )

http://www.sfu.ca/~pkavousi/115-1504_MVI.AVI

hey since we have identical HP #s me and u should be head to head .. lets find out

 

So what are the numbers?

 

I wish I heard about this earlier. I was up around Reznick's around that time...

I look forward to seeing your numbers. Good luck.

 

OK here are the results:

first pull (let off early at 5000 IAT climbed to about 70 degrees C):

peak TQ 463 at 5000
peak HP 442 at 5000

This would have been the vbest run for power if we had gone to 6k.... oh well.

2nd pull (let off early at 5700 IAT climbed to 85 degrees C)

peak TQ 460 @ 4800
peak HP 470 @ 5700

3rd pull (let off at 6000, IAT climbed to 103 degrees C!!!!!)

peak TQ 458 @ 4800
peak HP 467 @ 5500

A/F ratios were 12.2 all the way to the end on all of the runs so the tune is looking pretty good as-is.

As you can see my IAT's are getting way too hot and that is bringing down my power... Gotta get an intercooler, even with 9 lbs of boost! My TQ should be peaking at around 5500 rpm, not 4800.

So, it looks like I am sitting at 470 rwhp for now, and I am happy with this on a nice conservative (rich) tune. Let's see what the track says!