What's a good shop to get a nitrous kit hooked up at?
#1
What's a good shop to get a nitrous kit hooked up at?
I'm lookin to get a nitrous kit this winter and my whole car is gatting a makeover. I'm gettin headers and some other stuff and I'll install that but I don't want to mess with wiring.
#2
Re: What's a good shop to get a nitrous kit hooked up at?
www.tbyrne.com he also posts on the boards.
#3
Re: What's a good shop to get a nitrous kit hooked up at?
New england dyno! Dean also owns and makes dynotune.org nitrous kits. check him out at www.nedyno.com or www.dynotune.org great kits and accesories.
#5
Re: What's a good shop to get a nitrous kit hooked up at?
Originally Posted by tbyrne
We can take care of this for you!
Tom
Tom
I tried PMing you first but it didn't work so....
I was just wondering how much it would cost to put a NX kit with purge valve in my 99 3.8? Any info is appreciated.
#6
Re: What's a good shop to get a nitrous kit hooked up at?
My board PMs are turned off (to many boards, way to many PMs ). You'd be looking at $300. to install the kit with purge. We're offering a $100. TBYRNE Motorsports gift certificate with any Nitrous Express kit purchase made through 11/28. This will help if your thinking about ordering it early.
#8
Re: What's a good shop to get a nitrous kit hooked up at?
Originally Posted by NOYZEE
Dean sells a good kit, and i believe he will install, he's very affordable, and close to arlington.
My cousin lives there. Mike Lions.
My cousin lives there. Mike Lions.
#9
Re: What's a good shop to get a nitrous kit hooked up at?
Im not sure where he lives, im not familia with arlington.
east side is in CT, they are about 1.5 hours from you. they are top notch, but Dean is closer to you, he sells the stuff, makes it, and installs it. i think give dean a call
east side is in CT, they are about 1.5 hours from you. they are top notch, but Dean is closer to you, he sells the stuff, makes it, and installs it. i think give dean a call
#10
Re: What's a good shop to get a nitrous kit hooked up at?
Originally Posted by NOYZEE
Im not sure where he lives, im not familia with arlington.
east side is in CT, they are about 1.5 hours from you. they are top notch, but Dean is closer to you, he sells the stuff, makes it, and installs it. i think give dean a call
east side is in CT, they are about 1.5 hours from you. they are top notch, but Dean is closer to you, he sells the stuff, makes it, and installs it. i think give dean a call
#11
Re: What's a good shop to get a nitrous kit hooked up at?
Dean is located in Worcester - http://www.nedyno.com/service.htm
(508) 752-5557
info@nedyno.com
7 Lenora Street
Worcester, MA 01607
Driving Directions:
From the Mass Pike:
<>From the Mass Pike <>Take exit number 10A toward RT-146N <>Stay on RT-146N <>Take your first exit off of RT-146N onto Ballard st<>Go to the bottom of the ramp and take a left <>Go down to the first light and turn Left( Curtis industries Truck parts on the right)<>Go down about 300 yards (through some lights, do not get on any highways, stay straight, then Turn LEFT onto Lenora st - the company on the corner is Door Systems - we are the next building on the left<>
From RT 495 to 290W
<> From RT-290W, Take exit number 12 toward RT-146S/Millbury/Providence <> Go into the rotary and bear right following the RT-146S sign.<>You will go about 1 mile and go through the first set of lights. Then at the second set of lights you see a real big RT-146S sign DO NOT TURN ONTO THIS HIGHWAY!!!!, stay to the left and continue going straight <>Turn Right at third set of lights ( across from Curtis Truck parts--big orange sign)<>Go down about 300 yards (through some lights, do not get on any highways, stay straight, then Turn LEFT onto Lenora st - the company on the corner is Door Systems - we are the next building on the left<>
(508) 752-5557
info@nedyno.com
7 Lenora Street
Worcester, MA 01607
Driving Directions:
From the Mass Pike:
<>From the Mass Pike <>Take exit number 10A toward RT-146N <>Stay on RT-146N <>Take your first exit off of RT-146N onto Ballard st<>Go to the bottom of the ramp and take a left <>Go down to the first light and turn Left( Curtis industries Truck parts on the right)<>Go down about 300 yards (through some lights, do not get on any highways, stay straight, then Turn LEFT onto Lenora st - the company on the corner is Door Systems - we are the next building on the left<>
From RT 495 to 290W
<> From RT-290W, Take exit number 12 toward RT-146S/Millbury/Providence <> Go into the rotary and bear right following the RT-146S sign.<>You will go about 1 mile and go through the first set of lights. Then at the second set of lights you see a real big RT-146S sign DO NOT TURN ONTO THIS HIGHWAY!!!!, stay to the left and continue going straight <>Turn Right at third set of lights ( across from Curtis Truck parts--big orange sign)<>Go down about 300 yards (through some lights, do not get on any highways, stay straight, then Turn LEFT onto Lenora st - the company on the corner is Door Systems - we are the next building on the left<>
#14
Re: What's a good shop to get a nitrous kit hooked up at?
Originally Posted by mike996
whats that suposed to mean?
#15
Re: What's a good shop to get a nitrous kit hooked up at?
Originally Posted by grygst76
I meant when you look at the car you would think it had something worth running because it is very sharp and race ready, put an LS1 in it