I installed my heads and cam last week and want to get the noids off the intake that I painted all nice and purrrrddddddyyyyy. I guss I just need some Ideas on where to move them. Here is a pic of where they are now. Noid pic noid pic 2

Thanks for any ideas

Sean

 

Move the N20 + purge noids here.

I've been very happy with them right there. I really don't think there are any GOOD places for our noids to be mounted using the stock length line unless you have a STB.

 

Take a lokk at this. I put mine here and I'm happy with them, no extra line needed.

NX install

 

I like that setup I think I will go this way but my nozzel I drilled my whole in the trickflow elbow I migth have to plug it up and move it.


Nice Job by the way

 

You might be able to set it up so the lines run to the elbow on the other side. Just flip the solenoids the other way if you know what I'm talking about. The line from the bottle is way long, so you should be able to do it that way. So what I mean is on mine all the lines run from the passenger side to the drivers side. Just turn the solenoids 180 so that your lines will run from drivers side to the passenger side.

 

Has anyone tried to keep the solenoids under the car? Seems that if the line goes under cleanly (plenty of line from the tank)... why not just keep the solenoids under there too and that way you can keep them off of your manifold.