what else is needed?
what else is needed?
This is what I have picked out so far. What else would be needed to safely run a 100-150shot on a low mileage lt1? I would pick up a bottle heater/purge
http://www.dynotunenitrous.com/store/scripts/cart.asp
http://www.dynotunenitrous.com/store/scripts/cart.asp
This is what I have picked out so far. What else would be needed to safely run a 100-150shot on a low mileage lt1? I would pick up a bottle heater/purge
http://www.dynotunenitrous.com/store/scripts/cart.asp
http://www.dynotunenitrous.com/store/scripts/cart.asp
ok..I had these two items in there
http://www.dynotunenitrous.com/store...p?idproduct=67
and....
http://www.dynotunenitrous.com/store...?idproduct=110
http://www.dynotunenitrous.com/store...p?idproduct=67
and....
http://www.dynotunenitrous.com/store...?idproduct=110
To get the best results from the A/F shut down switch it will also need a wideband O2 sensor. It will work with the factory narrow band but it just isn't as accurate as a wideband.
I suggest running a FPSS and a window switch at minimum with any nitrous kit.
I suggest running a FPSS and a window switch at minimum with any nitrous kit.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM



