Does the stock silencer on the intake elbow affect the a dry shot from around the MAF?

Would it be better to plug it up or go 1LE elbow?

KASR

------------------
94 Z28 Hardtop - (stock: 10.5:1, 5.7L, rated 275hp@5200, 325lb@2400, MFI - Current Rating: ???)
Throwing money at the hungry beast and moddin' away like a mad-man =) Holley CAI, !TB, !MAF, Flowmaster Catback, Monza Quad Tips, 3" cutout, 3.23 gears GU5/G80 perf. axle, QLC, 4L60-E, Spectre Breather and Filter, new plugs, wires, and filter. MODS TO COME: Jet-Hot Hooker Long Tubes, Yank 3000 TC, cc305 cam, 1.6 rockers, NX Gen II

 

I dont think it would pose a problem....but I would plug it up or get the 1le.

------------------
Greg
95 Z28 conv M6
Georgia F-Body Association

Stage 1 heads, 1.6rr, Meziere WP
lt4 hot cam,lt4 timing chain kit,52mm TB,
Hooker Headers, Pro 5 shifter,3.73s,
NX 150 progressive,
Self-tuned via Tunercat

 

Nope, it won't have a problem with the silencer. I know of a few people who have hidden the nozzle for a the dry kits at the bottom of the silencer.

------------------
If I'm playin, I'm sprayin

93 Z28 A3 - w/ Jet Hot coated Hooker LT's and true 3" duals
(hiflow cats, cutouts, and Car Chemistry insert mufflers)

 

Hey speedmiser....I was lookin at your sig.....

If I'm playin ,I'm sprayin

I have a vid of some H-town street racing.... z28's a Z06 and a sc/nitrous mustang and I was thinkin that one of the guys was you?

------------------
94 Z28 m6
cold air,air foil,b&m ripper,vortech tb elbow,underdrive pulley ,flowbasterd muffler,moded maf,poly trans mount,fuel pres reg,exhaust cut out........new mods 355/with 12# of procharger boost

99 Camaro SS m6
#133
MTI air lid,some free mods,B&M Ripper,MacEwen Motorsports WFG with no high beam thingy....slp longtubes w/o cats,zo6 maf,z06 clutch,jet pcm,qt cut out

Big Red(truck)
406 ci,700r4 w/3000 rpm stall,3.73 10 bolt.
No more 406..kaboom / on the way 427 mighty mouse

 

I'm not out streeracing very often ('bout once every other month), so I'm doubtfull that you've got me on film. Maybe though.

My car is Gray-Green with a bra and the stock salad shooters (for now). It looks very stock with the exception of the side exit exhaust.

http://camaroz28.cardomain.com/id/speedmiser



------------------
If I'm playin, I'm sprayin

93 Z28 A3 - w/ Jet Hot coated Hooker LT's and true 3" duals
(hiflow cats, cutouts, and Car Chemistry insert mufflers)

 

Did you ever film a race with those cars?

------------------
94 Z28 m6
cold air,air foil,b&m ripper,vortech tb elbow,underdrive pulley ,flowbasterd muffler,moded maf,poly trans mount,fuel pres reg,exhaust cut out........new mods 355/with 12# of procharger boost

99 Camaro SS m6
#133
MTI air lid,some free mods,B&M Ripper,MacEwen Motorsports WFG with no high beam thingy....slp longtubes w/o cats,zo6 maf,z06 clutch,jet pcm,qt cut out

Big Red(truck)
406 ci,700r4 w/3000 rpm stall,3.73 10 bolt.
No more 406..kaboom / on the way 427 mighty mouse

 

Nope, no film on me that I know of.

I've ran a handfull of blown stangs over the past year, and a bunch of 4th gen camaros, but not a Z06.

------------------
If I'm playin, I'm sprayin

93 Z28 A3 - w/ Jet Hot coated Hooker LT's and true 3" duals
(hiflow cats, cutouts, and Car Chemistry insert mufflers)

[This message has been edited by speedmiser (edited July 01, 2002).]