Problems finding a mounting point for my solenoids and WOT switch.
Thread Starter
Registered User
Joined: Dec 2001
Posts: 240
From: Nashville, TN USA
Problems finding a mounting point for my solenoids and WOT switch.
Any one help me mount my fuel + nitrous solenoids, and WOT switch? I have a 2001 LS1 with a Strut tower brace. I hear that helps. Thank you all so much 
Banned
Joined: Mar 2002
Posts: 4,254
From: Darien, IL, usa (Chicago W.Suburbs)
mount your solenoids on the drivers side...way in front....and the wot switch goes behind the throttle body so that the little needle is directly behind the part the throttle stop thing hits when it is wide open
Registered User
Joined: Nov 2001
Posts: 407
From: Tacoma, WA
http://66.43.184.45/hidden.htm
I put the solenoids on either side of the intake under the air silencer, and the WOT switch inside the car hose clamped to the steering shaft. Very hidden, and easy to do.
I put the solenoids on either side of the intake under the air silencer, and the WOT switch inside the car hose clamped to the steering shaft. Very hidden, and easy to do.
Thread Starter
Registered User
Joined: Dec 2001
Posts: 240
From: Nashville, TN USA
What bolts, nuts come with the kit? Anyone have any pictures? I bought a used kit and just have the solenoids and brackets. Do I do any drilling? I don't care if it's hidden or not.
Banned
Joined: Mar 2002
Posts: 4,254
From: Darien, IL, usa (Chicago W.Suburbs)
Originally posted by ExMustangOwner
What bolts, nuts come with the kit? Anyone have any pictures? I bought a used kit and just have the solenoids and brackets. Do I do any drilling? I don't care if it's hidden or not.
What bolts, nuts come with the kit? Anyone have any pictures? I bought a used kit and just have the solenoids and brackets. Do I do any drilling? I don't care if it's hidden or not.
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM