all my mods are in the sig just click the link if you want to know what I have done. Now thats that is out of the way lets get to the problems I had first the charging sysytem is having trouble keeping up with the bottle heater and elec. wp/fans etc..So with the voltage being in the yellow I had to borrow a charger to just run the think. I would say I got it to about 12 volts. The run was on a 150 shot jetted rich 38 jet instead of the 35. Working on a way to get auto tap to read the obd2 pcm I have. So I am trying to play it safe. Other than that things were pretty good. I do think it could of hooked alittle better. but here it it..
1.605 60ft
4.591 330ft
6.666 594ft
7.134 8th ET
96.19 MPH

that shoudl be a 11.12 in the 1/4

10's in a few weeks

Oh and one more thing I just have to say Is first Thank GOD!Everything is working great and 2nd I have to let you guys know about Ion Salton ( MadZ28.com ) He has this thing screaming great now.. I think we can get it a little better too. So if your having trouble with your obd1 car not shifting email him hard to beat the price and service.
I also have to thank greg for the great Job of hosting my video's you can check out his site @http://www.screamandfly.com/home/

Now to the video's

short film dialup


Long film broadband

 

Looks great. I have that cam coming in the mail right now from Combination. It's good to see it is working so well. I will have to talk to MadZ28.com about tuning.

Dustin

 

best NA pass was a 7.90 on street tires. with a 1.74 60ft @86mph

Ion would be a good choice for programing .. He got mine down real good on one try.. but I think I need to get it dynoed and see where I should have my shift points I had him put them at stock .Might have it shift at 6,300 if it pulls on the dyno past that.Good luck on yours..



L8R Sean

 

funina....are you running 1.6rr and that cam with stock valve covers? I went with 1.5rr cause I thought there might be clearance issues. If no, Im putting in some 1.6rr while the motor is still apart. Thanks.

 

I am running 1.6RR crane golds. no problems at all.

 

What gear are you runnung now? I remember you talking about putting the 3.23's in it. I am hoping to go 10's with my new cam and TH350 setup with a 3.42 gear. I really like the N20+ high gear setup and it works good on the street too. Anyways nice run. Later

 

I am still running the 3.23 gear it is working out pretty good for me. Only thing on the Th-350 is the first gear isnt as low as the 4L60E but I think it will work just fine.

 

Sean,
your firmness is stock, but it should be shifting around 6100 if not 6200.