Hello, my name is Diego, and I am new to the n20 tech. I am a frequent member to the forum in general. Well I just finished purchasing a NX Maf kit for my Forged 383 lt1.(yes i have the Ram Air Setup) Along with the kit, I also recieved a TPS switch, bottle warmer, and Fuel Pressure Safety Switch, and gauge, and switch panel. I am also running an MSD Digital 6 ignition for timing purposes. This is my very first kit, and am very new to nitrous. I have read up a bit, and trying to be as safe as possible with my kit. I know that the FPSS is just incase my fuel pressure drops below a certain point, it will cut the n20 off. As for the TPS, it monitors your voltage, and knows when your at full throttle to activate the system. is it also a good idea to run a window switch? I will also be upgrading my fuel pump as well. i am only going to go possibly a 100-150 shot. Any advice will be greatly appreciated, as you will be seeing me post here quite frequently asking "How do you,....." Thanks guys

 

Welcome Diego!

glad to see that you finally purchased a kit! I decided to keep mine.