Todays specials
Thread Starter
Registered User
Joined: Mar 2002
Posts: 1,842
From: Bloomfield Hills MI
Todays specials
Crapload of mandrel bends! They are 1 3/4", I need 1 7/8"! http://kak.com/camaro/headers/DSCN0836.JPG
$80
LT1/SBC flanges meant for 1 3/4" pipes. 3/8" thick, these should also bolt to the lt1. I need spreadport flanges custom made so my loss is your gain! $40 for the pair. http://kak.com/camaro/headers/DSCN0838.JPG
1074 Felpro head gaskets, $60 for the pair
LT1 header gaskets, $30
Mallory electronic ignition, 2 step, btm and everything is all digitally programmed with input wires ready to go. $200
Two passenger side SLP headers for use with a turbo setup. Drivers side header is gunna point strait forward, this is what jordan musser did for his turbo setup. (I dare ya to try and do this through SLP again, lol)
Dig in, I dont want to ship the tubes as they are ~ 50lbs thats why its listed locally.
$80
LT1/SBC flanges meant for 1 3/4" pipes. 3/8" thick, these should also bolt to the lt1. I need spreadport flanges custom made so my loss is your gain! $40 for the pair. http://kak.com/camaro/headers/DSCN0838.JPG
1074 Felpro head gaskets, $60 for the pair
LT1 header gaskets, $30
Mallory electronic ignition, 2 step, btm and everything is all digitally programmed with input wires ready to go. $200
Two passenger side SLP headers for use with a turbo setup. Drivers side header is gunna point strait forward, this is what jordan musser did for his turbo setup. (I dare ya to try and do this through SLP again, lol)
Dig in, I dont want to ship the tubes as they are ~ 50lbs thats why its listed locally.
Last edited by Rodrigues; Nov 13, 2004 at 01:58 PM.
Thread Starter
Registered User
Joined: Mar 2002
Posts: 1,842
From: Bloomfield Hills MI
Re: Todays specials
KGresock, let me know when you want to pick them up... If you email at patrick@userid.net ill respond quicker. As for the bends timberwolf has "reserved" them but if he does not pick them up within a reasonable amt of time they are urs.
Originally Posted by KGRESOCK
I'll take the head gaskets
Registered User
Joined: Oct 1999
Posts: 3,531
From: Battle Creek, MI
Re: Todays specials
Originally Posted by Rodrigues
KGresock, let me know when you want to pick them up... If you email at patrick@userid.net ill respond quicker. As for the bends timberwolf has "reserved" them but if he does not pick them up within a reasonable amt of time they are urs.
Thread
Thread Starter
Forum
Replies
Last Post
PFYC
Supporting Vendor Group Purchases and Sales
0
Apr 3, 2015 10:54 AM
ChrisFrez
CamaroZ28.Com Podcast
0
Mar 22, 2015 09:12 AM