Parts for sale
Thread Starter
Registered User
Joined: Aug 2002
Posts: 4,676
From: Melvindale, MI, US
Parts for sale
Trying local first
Accel DFI gen 6 ECU and harness(SBC type) w/add on harnesses for fan control, TCC and hook-up to small cap HEI(remote coil type), can control Nitrous if required, has 2 step if turned on in software,has boost retard if turned on and a 3 bar MAP sensor is used, comes with a 2 bar MAP, comes with CAL-MAP software, cable and paperwork......... $600 O.B.O.
GM TPI set up, base(85 f-body w/ old type bolt angle), clean non-dented runners, upper plenum, Throttle body, fuel rails, cable bracket, vette type metal dist. cover, no bolts..............$250 O.B.O.
A set of eight 30 lb. Tomco "green band" high impedance Rotary Disc injectors. They look to have little or no mileage on them. Silicone grease is still dabbed around the o-rings and injector tips. These were popular in the GN/Syclone world because of their high resistance to fouling or clogging, and are manufactured by Lucas.............$100 O.B.O.
as a package, all this^^^ for $900 O.B.O. **SALE PENDING**
New in Box B&M Megashifter, universal, box opened to inspect, all parts there, all sealed bags still sealed........$150 O.B.O.
if anyone is installing a cage in a third gen camaro, I have a dash pad , perfect for cutting, all that is wrong with it is the drivers corner is broke off......$10 O.B.O.
set of salad shooters, no center caps, 2 with street tires(have to check on brand)245/50R16 w/50% tread and 2 with Nitto 555R drag radials 245/50R16 (I think, will double check size)w/40-50% tread......$200 O.B.O for the set
complete set of third gen accessory brackets, with P/S pump and A/C compressor, no alt........$200 O.B.O.
Harland Sharpe Roller Rockers, narrow body, NSA, 1.5 ratio, low miles(less than 5000 miles)......$150 O.B.O.
Accel DFI gen 6 ECU and harness(SBC type) w/add on harnesses for fan control, TCC and hook-up to small cap HEI(remote coil type), can control Nitrous if required, has 2 step if turned on in software,has boost retard if turned on and a 3 bar MAP sensor is used, comes with a 2 bar MAP, comes with CAL-MAP software, cable and paperwork......... $600 O.B.O.
GM TPI set up, base(85 f-body w/ old type bolt angle), clean non-dented runners, upper plenum, Throttle body, fuel rails, cable bracket, vette type metal dist. cover, no bolts..............$250 O.B.O.
A set of eight 30 lb. Tomco "green band" high impedance Rotary Disc injectors. They look to have little or no mileage on them. Silicone grease is still dabbed around the o-rings and injector tips. These were popular in the GN/Syclone world because of their high resistance to fouling or clogging, and are manufactured by Lucas.............$100 O.B.O.
as a package, all this^^^ for $900 O.B.O. **SALE PENDING**
New in Box B&M Megashifter, universal, box opened to inspect, all parts there, all sealed bags still sealed........$150 O.B.O.
if anyone is installing a cage in a third gen camaro, I have a dash pad , perfect for cutting, all that is wrong with it is the drivers corner is broke off......$10 O.B.O.
set of salad shooters, no center caps, 2 with street tires(have to check on brand)245/50R16 w/50% tread and 2 with Nitto 555R drag radials 245/50R16 (I think, will double check size)w/40-50% tread......$200 O.B.O for the set
complete set of third gen accessory brackets, with P/S pump and A/C compressor, no alt........$200 O.B.O.
Harland Sharpe Roller Rockers, narrow body, NSA, 1.5 ratio, low miles(less than 5000 miles)......$150 O.B.O.
Last edited by Dave89IROC; Sep 30, 2004 at 08:04 PM.
Thread Starter
Registered User
Joined: Aug 2002
Posts: 4,676
From: Melvindale, MI, US
Re: Parts for sale
Originally Posted by ws6transam
Those truly are nice injectors. I've seen the set and they are in essence, brand new.
As for the Accel DFI, what's it take to turn on the nitrous control in software?
As for the Accel DFI, what's it take to turn on the nitrous control in software?
Thread
Thread Starter
Forum
Replies
Last Post
00WS6mike
Site Help and Suggestions
2
Sep 13, 2002 10:37 PM
z28projects4ever
Automotive News / Industry / Future Vehicle Discussion
9
Jul 16, 2002 07:48 PM