old school pontiac parts
#1
old school pontiac parts
listing for a freind
1 new in box set of 8 eagle 3d esp rods6.625 with full floating pin990
2 new in box set of 8 ross piston for 4.190 bore
3 4 bolt main cap1s
4 455 crank 10/30 needs polishing
5 head number 62 ported,harland sharps r/r 1.5, 7/16 studs,s/s vavles,alum filled in ex port, set up 4 soild roller new springs
6 torker2 intake
7 hedman huslter 1 7/8 headders that one tube that fits around the frame on each side .it fits 68/72 a body
8 msd pro billet dist set up 4 soild roller p/n 121.8563,performance distributors street/strip set up 4 small soild roller,mallory daul point distributor
9 little baby stater an 2 flex plates
10 1 set of comp cam roller lifters
11 1 bhj hermonic balancers with alum pully
12 used roll master timming chain
13 th400 with 34 elemant sprag an tci res vavle body an tci 10 conv 3500 stall both just rebuilt $500.00
14 2 sets of vavle covers
15 stock oil pan an s/d oilpump, wandage tray ,timming cover with water pump.
16 1 warrior steal freeze plug kit,1 missing from the kit.
17 1set of warrior lighten wrist pins new in box
18 harden oil pump shaft.
19 have a lot of exter parts like intake gasket, vave cover gasket,upper an lower motor mounts.
getting out of pontic motors going small block chevy
i have pics of it all ... would like 2 sell as package deal 4 $3000 or obo thanks koz
Contact Phone Number: 313 418 3096
Location: PLYMOUTH, MI
1 new in box set of 8 eagle 3d esp rods6.625 with full floating pin990
2 new in box set of 8 ross piston for 4.190 bore
3 4 bolt main cap1s
4 455 crank 10/30 needs polishing
5 head number 62 ported,harland sharps r/r 1.5, 7/16 studs,s/s vavles,alum filled in ex port, set up 4 soild roller new springs
6 torker2 intake
7 hedman huslter 1 7/8 headders that one tube that fits around the frame on each side .it fits 68/72 a body
8 msd pro billet dist set up 4 soild roller p/n 121.8563,performance distributors street/strip set up 4 small soild roller,mallory daul point distributor
9 little baby stater an 2 flex plates
10 1 set of comp cam roller lifters
11 1 bhj hermonic balancers with alum pully
12 used roll master timming chain
13 th400 with 34 elemant sprag an tci res vavle body an tci 10 conv 3500 stall both just rebuilt $500.00
14 2 sets of vavle covers
15 stock oil pan an s/d oilpump, wandage tray ,timming cover with water pump.
16 1 warrior steal freeze plug kit,1 missing from the kit.
17 1set of warrior lighten wrist pins new in box
18 harden oil pump shaft.
19 have a lot of exter parts like intake gasket, vave cover gasket,upper an lower motor mounts.
getting out of pontic motors going small block chevy
i have pics of it all ... would like 2 sell as package deal 4 $3000 or obo thanks koz
Contact Phone Number: 313 418 3096
Location: PLYMOUTH, MI
#3
Re: old school pontiac parts
they can fit either block. a 455 crank can have the mains cut down to the same diam. as a 400 to work in a 400 block, the rods/pistons will bolt right in. exc. haveing to bore the block to fit the pistons anyways. the pont. guys act. like the 400 block better for performance cause of less frictional power loss with the smaller main journals and something else Im forgetting.
tim, what all is done to the trans internally? can you find out for me? did you mean reverse manual valve body? what kind? who rebuilt the trans/conv.? warranty? short tail TH400?
thanks
tim, what all is done to the trans internally? can you find out for me? did you mean reverse manual valve body? what kind? who rebuilt the trans/conv.? warranty? short tail TH400?
thanks
#4
Re: old school pontiac parts
Hey Chris i think the trans was rebuilt by Jowl on joy maybe ??
i think my freind is going to sign on tonite so he can anwser questions
heres a pic of the trans
http://img5.imageshack.us/img5/4303/...84853311dj.jpg
opps sorry for the small pic
i think my freind is going to sign on tonite so he can anwser questions
heres a pic of the trans
http://img5.imageshack.us/img5/4303/...84853311dj.jpg
opps sorry for the small pic
#5
Re: old school pontiac parts
Is $500.00 the asking price or amount he paid to get them rebuilt. If its the rebuild price. What would you what for it and is he willing to do a partial trade because i have a th350 needs to be rebuilt and a new in box TCI reverse auto/manual valve body for it if interested if not give me a price for the trans. Thanks, Dave.
#6
Re: old school pontiac parts
Originally Posted by BIGCOWL-IMP
Hey Chris i think the trans was rebuilt by Jowl on joy maybe ??
i think my freind is going to sign on tonite so he can anwser questions
heres a pic of the trans
http://img5.imageshack.us/img5/4303/...84853311dj.jpg
opps sorry for the small pic
i think my freind is going to sign on tonite so he can anwser questions
heres a pic of the trans
http://img5.imageshack.us/img5/4303/...84853311dj.jpg
opps sorry for the small pic
Thread
Thread Starter
Forum
Replies
Last Post
whuzizname
Automotive News / Industry / Future Vehicle Discussion
12
07-22-2002 07:52 PM