Set of 8 bosch 36 lbs injectors $225 obo

J&S Electronics Safeguard with Knock Monitor, works on LT1 or any std V8.
Would be great for SC or turbo motor on pump gas $325 obo

Edelbrock Vic jr intake setup for LT1 heads for carb setup, $175 obo

JW SFI flexplate for 87 and up SBC $60 obo

4.10 gears for 9" Ford $50 obo

Comp Cams Pro-Magnum Non-Self-Aligning Roller Rocker Arms, 7/16" stud, 1.6 Ratio, guide plates, 7/16 studs $200 obo

Detroit soft locker for 31sp 9" Ford $275 obo

2 LT1 2-bolt blocks, one is a stock short block with some spun rods $150 obo
2nd one a bare block that needs a .040 over bore, its drilled for 4 bolt main, no caps $150 obo

Cam motion hyd roller 242/251 584/592 w/1.6 rr on a 108 lc made 560 engine HP @ 7000rpm with my stock short block 350 and lt1 heads, best et was 10.54@127, best mph was a 10.59 @ 129.

I'm selling cam, Cran hyd roller lifter, AFR hdydr rev kit and valve springs for $450

MSD 6A box $60

4 - 97' Z28 16" 5 spoke wheels, silver in color, very low miles, mint $180 obo

2 - BFG comp TA ZR 245/50/16 tires with 85% tred left $100 obo

Alum tubing 2- 90* 4" 6061 bends and 3 ft of 4" tubing $75 obo

17 Smith bros push rods with 210*b for T&D rockers 7.035 long 5/16 .084 wall, 10 pass on them, new $170, selling for $80 obo

16 pushrods 5/16 .084 wall 7.155 long $50 obo

 

How many miles and condition of the injectors...please

 

No miles only used at the drag strip, about 10 passes.

these are the bosch silm line injector.

 

They will fit in my stock LT1 fuel rails and work?

 

yes they will work in your stock lt1 fuel rail, also your PCM will have to be reprogram so they will work.

 

Yeah, my PCM has more to change then just the injectors this year That is not a problem. Let me see if I can get the money out of the warden...un I mean wife

 

You've got mail.

 

if so consider it sold

 

I'm interested in the 9" gear set Steve.

If you haven't moved it yet, consider it gone.

 

I would be interested in the tires if you will deliver them to the downriver area. Or maybe we could meet 1/2 way. You can call me on my cell at (734)658-0250 And let me know the deal.